EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bubble nucleation and jetting inside a millimetric droplet

Juan Manuel Rosselló, Hendrik Reese, K. Ashoke Raman, Claus-Dieter Ohl

Journal of Fluid Mechanics · 10.08.2023 · 968

DOI: 10.1017/jfm.2023.542 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Fluid Mechanics, online erschienen am 04.08.2023. Verfasst von Juan Manuel Rosselló und 3 weiteren Autor:innen. Die Arbeit wurde bisher 49-mal zitiert (Crossref) und nennt 97 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, HORIZON EUROPE Marie Sklodowska-Curie Actions.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work we present experiments and simulations on the nucleation and successive dynamics of laser-induced bubbles inside liquid droplets in free-fall motion, i.e. a case where the bubbles are subjected to the influence of a free boundary in all directions. Within this spherical millimetric droplet, we have investigated the nucleation of secondary bubbles induced by the rarefaction wave that is produced when the shock wave emitted by the laser-induced plasma reflects at the drop surface. Interestingly, three-dimensional clusters of cavitation bubbles are observed. Their shape is compared with the negative pressure distribution computed with a computational fluid dynamics model and allows us to estimate a cavitation threshold value. In particular, we observed that the focusing of the waves in the vicinity of the free surface can give rise to explosive cavitation events that end up in fast liquid ejections. High-speed recordings of the drop/bubble dynamics are complemented by the velocity and pressure fields simulated for the same initial conditions. The effect of the proximity of a curved free surface on the jetting dynamics of the bubbles was qualitatively assessed by classifying the cavitation events using a non-dimensional stand-off parameter ${\Upsilon\hskip -1,05em -\,}$ that depends on the drop size, the bubble maximum radius and the relative position of the bubble inside the drop. Additionally, we studied the role of the drop's curvature by implementing a structural similarity algorithm to compare cases with bubbles produced near a flat surface to the bubbles inside the drop. Interestingly, this quantitative comparison method indicated the existence of equivalent stand-off distances at which bubbles influenced by different boundaries behave in a very similar way. The oscillation of the laser-induced bubbles promotes the onset of Rayleigh–Taylor and Rayleigh–Plateau instabilities, observed on the drop's surface. This phenomenon was studied by varying the ratio of the maximum radii of the bubble and the drop. The specific mechanisms leading to the destabilisation of the droplet surface were identified.

Förderung

  • Deutsche Forschungsgemeinschaft
  • HORIZON EUROPE Marie Sklodowska-Curie Actions

Zitieren

APA

Rosselló, J. M., Reese, H., Raman, K. A., & Ohl, C. (2023). Bubble nucleation and jetting inside a millimetric droplet. Journal of Fluid Mechanics, 968. https://doi.org/10.1017/jfm.2023.542

Vancouver

Rosselló JM, Reese H, Raman KA, Ohl C. Bubble nucleation and jetting inside a millimetric droplet. Journal of Fluid Mechanics. 2023;968. doi:10.1017/jfm.2023.542

BibTeX
@article{Rossell2023,
  author = {Rosselló, Juan Manuel and Reese, Hendrik and Raman, K. Ashoke and Ohl, Claus-Dieter},
  title = {Bubble nucleation and jetting inside a millimetric droplet},
  journal = {Journal of Fluid Mechanics},
  year = {2023},
  volume = {968},
  doi = {10.1017/jfm.2023.542}
}
Kostenlos starten →