Transformer-Based Offline Printing Strategy Design for Large Format Additive Manufacturing
Journal of Computing and Information Science in Engineering · 01.02.2025 · 25 (2)
DOI: 10.1115/1.4067469 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Computing and Information Science in Engineering, online erschienen am 10.01.2025. Verfasst von Haoyang Xie und 3 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 32 Literaturangaben. Gefördert von: Division of Civil, Mechanical and Manufacturing Innovation.
Abstract (Originalsprache)
In the realm of large format additive manufacturing (LFAM), determining an effective printing strategy before actual printing involves predicting temperature behaviors and controlling layer time, which has consistently been challenging. Currently, temperature prediction for controlling layer time in LFAM is primarily conducted through offline simulations or online monitoring. However, these approaches are typically tailored to specific cases and lack generalizability. Consequently, there exists a significant gap in the development of a universal model that can leverage historical data to predict temperature across various new geometries and positions. In this article, a novel approach to optimize printing strategies for LFAM is proposed through the development and application of a transformer-based model focused on the dynamic prediction and management of temperature profiles across the print surface. Subsequently, the authors input the predicted temperature into an optimization model to determine the optimal layer time. A series of experiments were conducted to validate the effectiveness of the proposed model. Using historical temperature data collected from the real printing processes, the model demonstrated a high degree of accuracy in predicting temperature profiles for new design, enabling the optimization of layer time settings far beyond the capabilities of traditional fixed-time methods. This process significantly enhances the printing strategy, thereby increasing both the efficiency of the printing process and the quality of the printed objects.
Förderung
- Division of Civil, Mechanical and Manufacturing Innovation
Zitieren
APA
Xie, H., Hoskins, D., Rowe, K., & Ju, F. (2025). Transformer-Based Offline Printing Strategy Design for Large Format Additive Manufacturing. Journal of Computing and Information Science in Engineering, 25(2). https://doi.org/10.1115/1.4067469
Vancouver
Xie H, Hoskins D, Rowe K, Ju F. Transformer-Based Offline Printing Strategy Design for Large Format Additive Manufacturing. Journal of Computing and Information Science in Engineering. 2025;25(2). doi:10.1115/1.4067469
BibTeX
@article{Xie2025,
author = {Xie, Haoyang and Hoskins, Dylan and Rowe, Kyle and Ju, Feng},
title = {Transformer-Based Offline Printing Strategy Design for Large Format Additive Manufacturing},
journal = {Journal of Computing and Information Science in Engineering},
year = {2025},
volume = {25},
number = {2},
doi = {10.1115/1.4067469}
}
EUVIMED