EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Emerging trends in large format additive manufacturing processes and hybrid techniques

Daniele Vanerio, Mario Guagliano, Sara Bagherifard

Progress in Additive Manufacturing · 2025-04 · 10 (4) · 1945-1972

DOI: 10.1007/s40964-024-00771-1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 19.09.2024. Verfasst von Daniele Vanerio und 2 weiteren Autor:innen. Die Arbeit wurde bisher 40-mal zitiert (Crossref) und nennt 215 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Politecnico di Milano.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Large format additive manufacturing (LFAM) technologies are rapidly growing with significant potential for application in multiple technological sectors like aerospace, tooling, automotive, marine, construction, and energy. LFAM processes offer significant advantages including reduced lead time, cost, and material waste, which are further amplified due to the increased volume of the components. This review paper focuses on LFAM technologies with the highest technology readiness level, i.e., metal Directed Energy Deposition (DED), polymer extrusion, and solid-state deposition (i.e. cold spray additive manufacturing (CSAM)). Common system setups, the maximum deposition rate, and the range of processable materials, along with the achievable mechanical properties and geometrical characteristics, are outlined for each technology, both in individual and hybrid manufacturing formats. The main technological challenges are gathered and discussed to highlight the areas that require further development. Finally, the current industrial applications for LFAM technologies and the expected future developments are outlined. This review provides an overview of LFAM technologies’ current status and discusses their potential in improving the manufacturing of complex and large geometries, with a significant reduction in material and energy consumption, while ensuring high-quality and high-performance components.

Förderung

  • Politecnico di Milano

Zitieren

APA

Vanerio, D., Guagliano, M., & Bagherifard, S. (2025). Emerging trends in large format additive manufacturing processes and hybrid techniques. Progress in Additive Manufacturing, 10(4), 1945-1972. https://doi.org/10.1007/s40964-024-00771-1

Vancouver

Vanerio D, Guagliano M, Bagherifard S. Emerging trends in large format additive manufacturing processes and hybrid techniques. Progress in Additive Manufacturing. 2025;10(4):1945-1972. doi:10.1007/s40964-024-00771-1

BibTeX
@article{Vanerio2025,
  author = {Vanerio, Daniele and Guagliano, Mario and Bagherifard, Sara},
  title = {Emerging trends in large format additive manufacturing processes and hybrid techniques},
  journal = {Progress in Additive Manufacturing},
  year = {2025},
  volume = {10},
  number = {4},
  pages = {1945--1972},
  doi = {10.1007/s40964-024-00771-1}
}
Kostenlos starten →