EUVIMEDEUVIMED entdecken
Crossref

Does Annulus Fibrosus Lamellar Adhesion Testing Require Preconditioning?

Sabrina I Sinopoli iD, Mitchel C Whittal, K Josh Briar, Diane E Gregory

Journal of Biomechanical Engineering · 2025

DOI: 10.1115/1.4067399 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, 2025. Verfasst von Sabrina I Sinopoli und 3 weiteren Autor:innen. Beteiligte Einrichtung: Wilfrid Laurier University, 75 University Avenue West, Waterloo, ON N2L 3C5, Canada. Hauptthemen laut MEDLINE: Annulus Fibrosus. Die Arbeit nennt 18 Literaturangaben. Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The interlamellar matrix (ILM), located between the annular layers of the intervertebral disc (IVD), is an adhesive component which acts to resist delamination. Investigating the mechanical properties of the ILM can provide us with valuable information regarding risk of disc injury; however given its viscoelastic nature, it may be necessary to conduct preconditioning on tissue samples before measuring these ILM properties. Therefore, the aim of this study was to optimize mechanical testing protocols of the ILM by examining the effect of preconditioning on stiffness and strength of this adhesive matrix. Eighty-eight annular samples were dissected from 22 porcine cervical discs and randomized into one of four testing conditions consisting of ten cycles of 15% strain followed by a 180 deg adhesive peel test. The four testing groups employed a different strain rate for the ten cycles of preconditioning: 0.01 mm/s (n = 23); 0.1 mm/s (n = 26); 1 mm/s (n = 23); and no preconditioning employed (n = 16). Samples preconditioned at 0.01 mm/s were significantly less stiff than those that had not received preconditioning (p = 0.014). No other results were found to be statistically significant. Given the lack of differences observed in this study, preconditioning is likely not necessary prior to conducting a 180 deg peel test. However, if preconditioning is employed, the findings from this study suggest avoiding preconditioning conducted at very slow rates (i.e., 0.01 mm/s) as the long testing time may negatively affect the tissue.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Annulus FibrosusAnimalsSwineMechanical TestsStress, MechanicalBiomechanical PhenomenaAdhesivenessMaterials Testing

Stichwörter der Autor:innen

intervertebral disclamellar adhesionpeel teststrain rateviscoelastic, cyclic

Autor:innen und Institutionen

  • Wilfrid Laurier University, 75 University Avenue West, Waterloo, ON N2L 3C5, Canada.
  • University of Guelph, 50 Stone Road East, Guelph, ON N1G 2W1, Canada.
  • University of Guelph.

ORCID-Profile: Sabrina I Sinopoli

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Sinopoli, S. I., Whittal, M. C., Briar, K. J., & Gregory, D. E. (2025). Does Annulus Fibrosus Lamellar Adhesion Testing Require Preconditioning?. Journal of Biomechanical Engineering. https://doi.org/10.1115/1.4067399

Vancouver

Sinopoli SI, Whittal MC, Briar KJ, Gregory DE. Does Annulus Fibrosus Lamellar Adhesion Testing Require Preconditioning?. Journal of Biomechanical Engineering. 2025. doi:10.1115/1.4067399

BibTeX
@article{Sinopoli2025,
  author = {Sinopoli, Sabrina I and Whittal, Mitchel C and Briar, K Josh and Gregory, Diane E},
  title = {Does Annulus Fibrosus Lamellar Adhesion Testing Require Preconditioning?},
  journal = {Journal of Biomechanical Engineering},
  year = {2025},
  doi = {10.1115/1.4067399}
}
Kostenlos starten →