Roughness Investigations on In-Service High-Pressure Compressor Blades—Part I: An Automated Process for High-Fidelity Roughness Measurements
Journal of Turbomachinery · 01.08.2025 · 147 (8)
DOI: 10.1115/1.4067291 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 13.01.2025. Verfasst von Ilias Vasilopoulos und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 24 Literaturangaben. Gefördert von: Bundesministerium für Wirtschaft und Energie.
Abstract (Originalsprache)
The two-part publication deals with roughness investigations on in-service high-pressure compressor (HPC) blades, both in terms of measurements and simulations. In this article (Part I), an automated process for performing detailed surface roughness measurements of the blades has been developed. Specifically, a highly accurate Alicona sensor (20x lens; capable of capturing roughness values down to 0.1μm) was combined with a pick-and-place robotic arm, and the system was trained to conduct roughness measurements on all the different rotor blades of a 10-stage HPC. First, the Alicona measuring device is validated against a NanoFocus device of similar accuracy. Then, a detailed measurement of the roughness on the suction and pressure side of Rotor 2 is demonstrated, using a 100-point grid. This process is further accelerated by using a reduced number of measuring points. The location of those points has been determined by numerical optimization that aims at minimizing the error between a radial basis function (RBF)-based approximation model and the detailed measured roughness distribution. Finally, a summary of the roughness measurements through the entire HPC is given (rotors only; before and after cleaning of the blades at an ultrasonic bath) and the article ends with a discussion of the results.
Förderung
- Bundesministerium für Wirtschaft und Energie
Zitieren
APA
Vasilopoulos, I., Rostamian, M., Voigt, M., Meyer, M., & Mailach, R. (2025). Roughness Investigations on In-Service High-Pressure Compressor Blades—Part I: An Automated Process for High-Fidelity Roughness Measurements. Journal of Turbomachinery, 147(8). https://doi.org/10.1115/1.4067291
Vancouver
Vasilopoulos I, Rostamian M, Voigt M, Meyer M, Mailach R. Roughness Investigations on In-Service High-Pressure Compressor Blades—Part I: An Automated Process for High-Fidelity Roughness Measurements. Journal of Turbomachinery. 2025;147(8). doi:10.1115/1.4067291
BibTeX
@article{Vasilopoulos2025,
author = {Vasilopoulos, Ilias and Rostamian, Mirco and Voigt, Matthias and Meyer, Marcus and Mailach, Ronald},
title = {Roughness Investigations on In-Service High-Pressure Compressor Blades—Part I: An Automated Process for High-Fidelity Roughness Measurements},
journal = {Journal of Turbomachinery},
year = {2025},
volume = {147},
number = {8},
doi = {10.1115/1.4067291}
}
EUVIMED