EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact of Additive Manufacturing Surface Roughness on the Aerodynamic Performance of Axial Compressor Blades

Sukhyeon Lim, Youngeon Ko, Dunam Hong, Myungho Kim, Seung Jin Song

International Journal of Aeronautical and Space Sciences · 2025-01 · 26 (1) · 42-49

DOI: 10.1007/s42405-024-00769-7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Aeronautical and Space Sciences, online erschienen am 04.07.2024. Verfasst von Sukhyeon Lim und 4 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agency for Defense Development, Seoul National University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper investigates the influence of additive manufacturing (AM) surface roughness on the aerodynamic performance of axial compressor blades. Though the AM offers advantages such as complex geometry fabrication and reduced material waste, its inherent surface roughness presents challenges in meeting compressor performance requirements. Previous studies have explored the implications of surface roughness on compressor performance. However, the existing literature on surface roughness does not sufficiently address the effects of AM surface roughness on the aerodynamic performance of compressor blades. Hence, in this paper, a linear compressor cascade experiment has been conducted at a Reynolds number $${Re}_{C}$$ Re C = 300,000. Three different roughness Reynold numbers, $${k}_{s}^{+}$$ k s + , have been examined—1.64 for the smooth blade, 24.5 and 43.8 for the rough 1 and rough 2 blades, respectively. Compared to the smooth blade, the pitchwise mass-averaged deviation and loss of the Rough 1 blade increase by 6.3% and 39.6%, respectively. For the Rough 2 blade, there is an increase of 18.4% and 98.8% in deviation and loss compared to the smooth blade, indicating a non-linear relationship between the deviation and loss, and $${k}_{s}^{+}$$ k s + .

Förderung

  • Agency for Defense Development
  • Seoul National University

Zitieren

APA

Lim, S., Ko, Y., Hong, D., Kim, M., & Song, S. J. (2025). Impact of Additive Manufacturing Surface Roughness on the Aerodynamic Performance of Axial Compressor Blades. International Journal of Aeronautical and Space Sciences, 26(1), 42-49. https://doi.org/10.1007/s42405-024-00769-7

Vancouver

Lim S, Ko Y, Hong D, Kim M, Song SJ. Impact of Additive Manufacturing Surface Roughness on the Aerodynamic Performance of Axial Compressor Blades. International Journal of Aeronautical and Space Sciences. 2025;26(1):42-49. doi:10.1007/s42405-024-00769-7

BibTeX
@article{Lim2025,
  author = {Lim, Sukhyeon and Ko, Youngeon and Hong, Dunam and Kim, Myungho and Song, Seung Jin},
  title = {Impact of Additive Manufacturing Surface Roughness on the Aerodynamic Performance of Axial Compressor Blades},
  journal = {International Journal of Aeronautical and Space Sciences},
  year = {2025},
  volume = {26},
  number = {1},
  pages = {42--49},
  doi = {10.1007/s42405-024-00769-7}
}
Kostenlos starten →