EUVIMEDEUVIMED entdecken
Crossref

Automated Grayscale Modulation to Enhance Digital Light Processing Fabrication Accuracy by Correcting Nonuniform Illumination

Saroj Subedi, S. M. Abu Naser Shovon, Henry Oliver T. Ware

Journal of Micro and Nano Science and Engineering · 2025

DOI: 10.1115/1.4067193 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Micro and Nano Science and Engineering, 2025. Verfasst von Saroj Subedi und 2 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 35 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, we addressed the challenge of nonuniform illumination in custom digital light processing (DLP) systems, often caused by imperfections in the digital micromirror device (DMD) or misalignments in the optical assembly. These issues lead to dimensional inconsistencies across the fabrication area. To overcome this, we developed an automated system for generating a “grayscale” mask that compensates for nonuniform illumination. This system serves as a preprinting calibration procedure, enhancing the precision of three-dimensional (3D) printed features. Our approach involves dividing the fabrication area into a mesh grid where in situ light intensities are measured. The system then calculates and acquires grayscale values that correspond to the minimum light intensity, thereby creating a grayscale mask that levels light distribution across the printing area. Additionally, we outline a method to generate grayscale masks for various light-emitting diode (LED) excitation powers (LEPs) based on initial data from three predefined powers. We evaluated the effectiveness of this method by comparing features printed with standard “full white” images to those adjusted with our grayscale-modulated images. The results show significant enhancements in both uniformity and dimensional accuracy, confirming the efficacy of our approach. This study demonstrates the potential of grayscale modulation to resolve illumination issue in DLP manufacturing to ensure higher precision in printed features.

Zitieren

APA

Subedi, S., Shovon, S. M. A. N., & Ware, H. O. T. (2025). Automated Grayscale Modulation to Enhance Digital Light Processing Fabrication Accuracy by Correcting Nonuniform Illumination. Journal of Micro and Nano Science and Engineering. https://doi.org/10.1115/1.4067193

Vancouver

Subedi S, Shovon SMAN, Ware HOT. Automated Grayscale Modulation to Enhance Digital Light Processing Fabrication Accuracy by Correcting Nonuniform Illumination. Journal of Micro and Nano Science and Engineering. 2025. doi:10.1115/1.4067193

BibTeX
@article{Subedi2025,
  author = {Subedi, Saroj and Shovon, S. M. Abu Naser and Ware, Henry Oliver T.},
  title = {Automated Grayscale Modulation to Enhance Digital Light Processing Fabrication Accuracy by Correcting Nonuniform Illumination},
  journal = {Journal of Micro and Nano Science and Engineering},
  year = {2025},
  doi = {10.1115/1.4067193}
}
Kostenlos starten →