EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Fast and Efficient Fabrication of Functional Electronic Devices through Grayscale Digital Light Processing 3D Printing

Farzad Gholami iD, Liang Yue, Mingzhe Li, Ayush Jain, Akhlak Mahmood, Marcus Fratarcangeli, Rampi Ramprasad, H Jerry Qi iD

Advanced Materials · 2024-11 · 36 (46)

DOI: 10.1002/adma.202408774 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 28.09.2024. Verfasst von Farzad Gholami und 7 weiteren Autor:innen. Beteiligte Einrichtung: The George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, 30332, USA. Die Arbeit wurde bisher 45-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Science Foundation, Air Force Office of Scientific Research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fabricating polymeric composites with desirable characteristics for electronic applications is a complex and costly process. Digital light processing (DLP) 3D printing emerges as a promising technique for manufacturing intricate structures. In this study, polymeric samples are fabricated with a conductivity difference exceeding three orders of magnitude in various portions of a part by employing grayscale DLP (g‐DLP) single‐vat single‐cure 3D printing deliberate resin design. This is realized through the manipulation of light intensity during the curing process. Specifically, the rational resin design with added lithium ions results in the polymer cured under the maximum UV‐light intensity exhibiting higher electrical resistance. Conversely, sections that are only partially cured retains uncured monomers, serving as a medium that facilitates ion mobility, consequently leading to higher conductivity. The versatility of g‐DLP allows precise control of light intensity in different regions during the printing process. This characteristic opens up possibilities for applications, notably the low‐cost, facile, and rapid production of complex electrical circuits and sensors. The utilization of this technique makes it feasible to fabricate materials with tailored conductivity and functionality, providing an innovative pathway to advance the accelerated and facile creation of sophisticated electronic devices.

Schlagwörter

Stichwörter der Autor:innen

3D printingConductivitySoft electronicsg‐DLP

Autor:innen und Institutionen

  • The George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, 30332, USA.
  • School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA, 30332, USA.
  • College of Computing, Georgia Institute of Technology, Atlanta, GA, 30332, USA.

ORCID-Profile: Farzad Gholami, H Jerry Qi

Förderung

  • National Science Foundation
  • Air Force Office of Scientific Research

Zitieren

APA

Gholami, F., Yue, L., Li, M., Jain, A., Mahmood, A., Fratarcangeli, M., Ramprasad, R., & Qi, H. J. (2024). Fast and Efficient Fabrication of Functional Electronic Devices through Grayscale Digital Light Processing 3D Printing. Advanced Materials, 36(46). https://doi.org/10.1002/adma.202408774

Vancouver

Gholami F, Yue L, Li M, Jain A, Mahmood A, Fratarcangeli M, et al. Fast and Efficient Fabrication of Functional Electronic Devices through Grayscale Digital Light Processing 3D Printing. Advanced Materials. 2024;36(46). doi:10.1002/adma.202408774

BibTeX
@article{Gholami2024,
  author = {Gholami, Farzad and Yue, Liang and Li, Mingzhe and Jain, Ayush and Mahmood, Akhlak and Fratarcangeli, Marcus and Ramprasad, Rampi and Qi, H Jerry},
  title = {Fast and Efficient Fabrication of Functional Electronic Devices through Grayscale Digital Light Processing 3D Printing},
  journal = {Advanced Materials},
  year = {2024},
  volume = {36},
  number = {46},
  doi = {10.1002/adma.202408774}
}
Kostenlos starten →