EUVIMEDEUVIMED entdecken
Crossref

Scaling Heat Transfer and Pressure Losses of Novel Additively Manufactured Rib Designs

Thomas M. Corbett, Karen A. Thole

Journal of Turbomachinery · 01.03.2025 · 147 (3)

DOI: 10.1115/1.4066581 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 08.10.2024. Verfasst von Thomas M. Corbett und 1 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 33 Literaturangaben. Gefördert von: Office of Energy Efficiency and Renewable Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rib turbulators are a key cooling feature that enables increased heat transfer on the interior of gas turbine components. As metal additive manufacturing becomes available for developing turbine parts, it is becoming increasingly important to understand how the surface roughness intrinsic to this manufacturing method impacts the performance of rib turbulators. To explore what impact roughness has on rib turbulator performance, several relevant scale test coupons were manufactured on two different additive machines out of IN718. Additionally, several coupons were built at large scales to effectively reduce the relative roughness size impacts and determine scale effects. A range of different wavy broken rib designs, varying both rib wavelength and orientation within a channel were evaluated. Coupon geometry and surface roughness were characterized using both computed tomography scans and optical profilometry. Variations between the print methods were found to have limited impact on the surface roughness, but significant impact on the accuracy to meet the design intent with rib heights varying by 30%. Following characterization, coupons were flow tested and it was found that the ribs that more regularly disturbed the flow as a function of their geometry most significantly enhanced heat transfer and pressure drop. The performance index of the broken wavy ribs was similar to other advanced rib designs, such as broken or V shaped ribs, but augmentations to heat transfer and pressure drop were generally lower. The rib performance was compared as a function of relative roughness, and it was found that increases in relative roughness resulted in increased friction factor and heat transfer, especially at higher Reynolds numbers.

Förderung

  • Office of Energy Efficiency and Renewable Energy

Zitieren

APA

Corbett, T. M., & Thole, K. A. (2025). Scaling Heat Transfer and Pressure Losses of Novel Additively Manufactured Rib Designs. Journal of Turbomachinery, 147(3). https://doi.org/10.1115/1.4066581

Vancouver

Corbett TM, Thole KA. Scaling Heat Transfer and Pressure Losses of Novel Additively Manufactured Rib Designs. Journal of Turbomachinery. 2025;147(3). doi:10.1115/1.4066581

BibTeX
@article{Corbett2025,
  author = {Corbett, Thomas M. and Thole, Karen A.},
  title = {Scaling Heat Transfer and Pressure Losses of Novel Additively Manufactured Rib Designs},
  journal = {Journal of Turbomachinery},
  year = {2025},
  volume = {147},
  number = {3},
  doi = {10.1115/1.4066581}
}
Kostenlos starten →