EUVIMEDEUVIMED entdecken
Crossref

Developing a Biomechanical Testing Setup of the Pelvis—Part II: Experimental Testing

Ahmed Soliman, Pierre-Louis Ricci, Slawomir Kedziora, Jens Kelm, Torsten Gerich, Stefan Maas

Journal of Biomechanical Engineering · 01.10.2023 · 145 (10)

DOI: 10.1115/1.4062578 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, online erschienen am 16.06.2023. Verfasst von Ahmed Soliman und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering, Faculty of Science, Technology and Medicine (FSTM), University of Luxembourg, 6, Rue Richard Coudenhove-Kalergi, Luxembour…. Hauptthemen laut MEDLINE: Pelvis, Gait. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 25 Literaturangaben. Gefördert von: Université du Luxembourg.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biomechanical testbench emulating the physiological loading of the pelvis is crucial in developing reconstructive implants for fragility fractures of the pelvis. Additionally, it will help understand the influence of the common daily loading on the pelvic ring. However, most reported experimental studies were mainly comparative with simplified loading and boundary conditions. In Part I of our study, we described the concept of the computational experiment design to design and construct a biomechanical testbench emulating the gait movement of the pelvis. The 57 muscles and joints' contact forces were reduced to four force actuators and one support, producing a similar stress distribution. The experimental setup is explained in this paper and some experimental results are presented. In addition, a series of repeatability and reproducibility tests were conducted to assess the test stand capabilities of replicating the gait physiological loading. The calculated stresses and the experimentally recorded strains showed that the pelvic ring response to the loading always follows the loaded leg side during the gait cycle. Furthermore, the experimental results of the pelvis displacement and strain at selected locations match the numerical ones. The developed test stand and the concept of computational experiment design behind it provide guidelines on how to design biomechanical testing equipment with physiological relevance.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PelvisGaitReproducibility of ResultsBiomechanical PhenomenaMechanical Phenomena

Stichwörter der Autor:innen

design of experimentsfinite elementfragility fractures of the pelvisgait loadingpelvistest stand

Autor:innen und Institutionen

  • Department of Engineering, Faculty of Science, Technology and Medicine (FSTM), University of Luxembourg, 6, Rue Richard Coudenhove-Kalergi, Luxembourg L-1359, Luxembourg.
  • Chirurgisch-Orthopädisches Zentrum Illingen, Rathausstraße 2, Illingen 66557, Germany.
  • Centre Hospitalier de Luxembourg, 4, Rue Barble, Luxembourg L-1210, Luxembourg.

Förderung

  • Université du Luxembourg

Zitieren

APA

Soliman, A., Ricci, P. L., Kedziora, S., Kelm, J., Gerich, T., & Maas, S. (2023). Developing a Biomechanical Testing Setup of the Pelvis—Part II: Experimental Testing. Journal of Biomechanical Engineering, 145(10). https://doi.org/10.1115/1.4062578

Vancouver

Soliman A, Ricci PL, Kedziora S, Kelm J, Gerich T, Maas S. Developing a Biomechanical Testing Setup of the Pelvis—Part II: Experimental Testing. Journal of Biomechanical Engineering. 2023;145(10). doi:10.1115/1.4062578

BibTeX
@article{Soliman2023,
  author = {Soliman, Ahmed and Ricci, Pierre-Louis and Kedziora, Slawomir and Kelm, Jens and Gerich, Torsten and Maas, Stefan},
  title = {Developing a Biomechanical Testing Setup of the Pelvis—Part II: Experimental Testing},
  journal = {Journal of Biomechanical Engineering},
  year = {2023},
  volume = {145},
  number = {10},
  doi = {10.1115/1.4062578}
}
Kostenlos starten →