EUVIMEDEUVIMED entdecken
Crossref

Simulation of the Childbirth Process in ls-dyna

Ru Tao, Michele J Grimm

Journal of Biomechanical Engineering · 2024

DOI: 10.1115/1.4064594 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, 2024. Verfasst von Ru Tao und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Michigan State University, East Lansing, MI 48824. Hauptthemen laut MEDLINE: Parturition, Pelvis. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 43 Literaturangaben. Gefördert von: National Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Childbirth or labor, as the final phase of a pregnancy, is a biomechanical process that delivers the fetus from the uterus. It mainly involves two important biological structures in the mother, the uterus—generating the pushing force on the fetus—and the pelvis (bony pelvis and pelvic floor muscles)—resisting the movement of the fetus. The existing computational models developed in this field that simulate the childbirth process have focused on either the uterine expulsion force or the resistive structures of the pelvis, not both. An FEM model including both structures as a system was developed in this paper to simulate the fetus delivery process in ls-dyna. Uterine active contraction was driven by contractile fiber elements using the Hill material model. The passive portion of the uterus and pelvic floor muscles were modeled with Neo Hookean and Mooney–Rivlin materials, respectively. The bony pelvis was modeled as a rigid body. The fetus was divided into three components: the head, neck, and body. Three uterine active contraction cycles were modeled. The model system was validated based on multiple outputs from the model, including the stress distribution within the uterus, the maximum Von Mises and principal stress on the pelvic floor muscles, the duration of the second stage of the labor, and the movement of the fetus. The developed model system can be applied to investigate the effects of pathomechanics related to labor, such as pelvic floor disorders and brachial plexus injury.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ParturitionPelvisPregnancyFemaleHumansBiomechanical PhenomenaComputer SimulationMechanical PhenomenaFinite Element Analysis

Stichwörter der Autor:innen

LS-DYNAchildbirthfinite element methodpelvisuterus

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Michigan State University, East Lansing, MI 48824.
  • Department of Mechanical Engineering, Michigan State University, East Lansing, MI 48824; Department of Biomedical Engineering, Michigan State University, East Lansing, MI 48824; College of Nanotechnology, Science, and E…

Förderung

  • National Science Foundation

Zitieren

APA

Tao, R., & Grimm, M. J. (2024). Simulation of the Childbirth Process in ls-dyna. Journal of Biomechanical Engineering. https://doi.org/10.1115/1.4064594

Vancouver

Tao R, Grimm MJ. Simulation of the Childbirth Process in ls-dyna. Journal of Biomechanical Engineering. 2024. doi:10.1115/1.4064594

BibTeX
@article{Tao2024,
  author = {Tao, Ru and Grimm, Michele J},
  title = {Simulation of the Childbirth Process in ls-dyna},
  journal = {Journal of Biomechanical Engineering},
  year = {2024},
  doi = {10.1115/1.4064594}
}
Kostenlos starten →