EUVIMEDEUVIMED entdecken
Crossref

Developing a Biomechanical Testing Setup of the Pelvis—Part I: Computational Design of Experiments

Ahmed Soliman, Pierre-Louis Ricci, Slawomir Kedziora, Jens Kelm, Torsten Gerich, Stefan Maas

Journal of Biomechanical Engineering · 01.10.2023 · 145 (10)

DOI: 10.1115/1.4062538 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, online erschienen am 14.06.2023. Verfasst von Ahmed Soliman und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering, Faculty of Science, Technology and Medicine (FSTM), University of Luxembourg, 6, Rue Richard Coudenhove-Kalergi, Luxembour…. Hauptthemen laut MEDLINE: Pelvis, Hip Joint. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 38 Literaturangaben. Gefördert von: Université du Luxembourg.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biomechanics of the human pelvis and the associated implants are still a medical and engineering debated topic. Today, no biomechanical testing setup is dedicated to pelvis testing and associated reconstructive implants with accepted clinical relevance. This paper uses the computational experiment design procedure to numerically design a biomechanical test stand that emulates the pelvis physiological gait loading. The numerically designed test stand reduces the 57 muscles and joints' contact forces iteratively to only four force actuators. Two hip joints' contact forces and two equivalent muscle forces with a maximum magnitude of 2.3 kN are applied in a bilateral reciprocating action. The stress distribution of the numerical model of the developed test stand is very similar to that of the numerical model of the pelvis with all 57 muscles and joint forces. For instance, at the right arcuate line, the state of stress is identical. However, at the location of superior rami, there is a deviation ranging from 2% to 20% between the two models. The boundary conditions and the nature of loading adopted in this study are more realistic regarding the clinical relevance than state-of-the-art. The numerically developed biomechanical testing setup of the pelvis in this numerical study (Part I) was found to be valid for the experimental testing of the pelvis. The construct of the testing setup and the experimental testing of an intact pelvis under gait loading are discussed in detail in Part II: Experimental Testing.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PelvisHip JointHumansGaitMusclesMechanical PhenomenaBiomechanical Phenomena

Stichwörter der Autor:innen

design of experimentsfinite elementgait loadingpelvistest stand

Autor:innen und Institutionen

  • Department of Engineering, Faculty of Science, Technology and Medicine (FSTM), University of Luxembourg, 6, Rue Richard Coudenhove-Kalergi, Luxembourg L-1359, Luxembourg.
  • Chirurgisch-Orthopädisches Zentrum Illingen, Rathausstraße 2, Illingen 66557, Germany.
  • Centre Hospitalier de Luxembourg, 4, rue Barble, Luxembourg L-1210, Luxembourg e-mail: gerich.torsten@chl.lu.

Förderung

  • Université du Luxembourg

Zitieren

APA

Soliman, A., Ricci, P. L., Kedziora, S., Kelm, J., Gerich, T., & Maas, S. (2023). Developing a Biomechanical Testing Setup of the Pelvis—Part I: Computational Design of Experiments. Journal of Biomechanical Engineering, 145(10). https://doi.org/10.1115/1.4062538

Vancouver

Soliman A, Ricci PL, Kedziora S, Kelm J, Gerich T, Maas S. Developing a Biomechanical Testing Setup of the Pelvis—Part I: Computational Design of Experiments. Journal of Biomechanical Engineering. 2023;145(10). doi:10.1115/1.4062538

BibTeX
@article{Soliman2023,
  author = {Soliman, Ahmed and Ricci, Pierre-Louis and Kedziora, Slawomir and Kelm, Jens and Gerich, Torsten and Maas, Stefan},
  title = {Developing a Biomechanical Testing Setup of the Pelvis—Part I: Computational Design of Experiments},
  journal = {Journal of Biomechanical Engineering},
  year = {2023},
  volume = {145},
  number = {10},
  doi = {10.1115/1.4062538}
}
Kostenlos starten →