EUVIMEDEUVIMED entdecken
Crossref

Manufacturing a Ceramic Turbine Rotor for a Compact Jet Engine

Bryan T. Leicht, Brian T. Bohan, Fred Schauer, Ryan Kemnitz, Lisa M. Rueschhoff, Benjamin Lam, James W. Kemp, William Costakis

Journal of Turbomachinery · 01.08.2023 · 145 (8)

DOI: 10.1115/1.4062124 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 10.04.2023. Verfasst von Bryan T. Leicht und 7 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 19 Literaturangaben. Gefördert von: Air Force Research Laboratory.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Compact military-grade jet engines offer many potential applications, including use in remotely piloted vehicles, but can be expensive to use for research and development purposes. A study aimed at increasing the power and thrust output of an inexpensive commercial compact engine found a material limitation issue in the turbomachinery. To gain the additional power, hotter turbine inlet temperatures were required. This temperature increase exceeded the limit of current uncooled metal turbine rotors but could be achieved through turbine rotors made from ceramics, such as silicon nitride, which would allow an increase in the thrust and power output by a factor of 1.44. Current ceramic turbine manufacturing methods are costly and time-consuming for rapid prototyping, but recent breakthroughs in ceramic additive manufacturing have allowed for cheaper methods and faster production which are beneficial for use in research and development when designs are being rapidly changed and tested. This research demonstrated, through finite element analysis, that a silicon nitride turbine rotor could meet the increased turbine inlet temperature conditions to provide the desired thrust and power increase. Furthermore, as a proof of concept, an additively manufactured drop-in replacement alumina turbine rotor was produced for the JetCat P400 small-scale engine in a manner that was cost-effective, timely, and potentially scalable for production. This compact engine was used to demonstrate that a cost-effective ceramic turbine could be manufactured. At the time of publication, the desired ceramic material, silicon nitride, was not available for additive manufacturing.

Förderung

  • Air Force Research Laboratory

Zitieren

APA

Leicht, B. T., Bohan, B. T., Schauer, F., Kemnitz, R., Rueschhoff, L. M., Lam, B., Kemp, J. W., & Costakis, W. (2023). Manufacturing a Ceramic Turbine Rotor for a Compact Jet Engine. Journal of Turbomachinery, 145(8). https://doi.org/10.1115/1.4062124

Vancouver

Leicht BT, Bohan BT, Schauer F, Kemnitz R, Rueschhoff LM, Lam B, et al. Manufacturing a Ceramic Turbine Rotor for a Compact Jet Engine. Journal of Turbomachinery. 2023;145(8). doi:10.1115/1.4062124

BibTeX
@article{Leicht2023,
  author = {Leicht, Bryan T. and Bohan, Brian T. and Schauer, Fred and Kemnitz, Ryan and Rueschhoff, Lisa M. and Lam, Benjamin and Kemp, James W. and Costakis, William},
  title = {Manufacturing a Ceramic Turbine Rotor for a Compact Jet Engine},
  journal = {Journal of Turbomachinery},
  year = {2023},
  volume = {145},
  number = {8},
  doi = {10.1115/1.4062124}
}
Kostenlos starten →