Ceramic Slurry Design for Vat‐Photopolymerization of Turbine Blade Ceramic Cores: A Review
Journal of the American Ceramic Society · 2026-10 · 109 (10)
DOI: 10.1111/jace.71322 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 15.10.2026. Verfasst von Emre Özeren und 5 weiteren Autor:innen. Die Arbeit nennt 105 Literaturangaben.
Abstract (Originalsprache)
Vat‐photopolymerization (VPP) is an additive manufacturing (AM) technology that offers distinct advantages over conventional manufacturing methods for fabricating complex ceramic components, including ceramic cores for gas‐turbine components. In VPP, a ceramic slurry serves as the feedstock and is selectively cured using a laser or projected light to form the desired solid geometry. A comprehensive understanding and optimization of ceramic slurry characteristics are essential for building high‐performance ceramic cores. This review thoroughly examines the slurry components, including powder composition, particle size and morphology, resin systems, and additives, and discusses their combined effects on rheology, curing behavior, and post‐processing. The reviewed studies indicate that high‐performance ceramic cores result from synergistic optimization of the entire slurry system rather than from the adjustment of a single process parameter. Silica‐based systems, particularly those containing alumina (Al 2 O 3 ) and zirconium silicate (ZrSiO 4 ), demonstrate a promising balance of low thermal expansion, refractoriness, leachability, and mechanical strength. Across the reviewed studies, representative processing ranges include solid loadings of 60–70 vol%, printable viscosities below 20 Pa·s, and achieving flexural strengths up to 24 MPa after sintering temperatures of 1150°C–1250°C. This review also explores the complex trade‐offs among mechanical strength, porosity, dimensional accuracy, and leachability, as well as the effects of infiltration on mechanical properties. Finally, this review highlights ongoing technical challenges and outlines research avenues for VPP‐processed ceramic cores.
Zitieren
APA
Özeren, E., Kaya, B., Kaya, D., Lagarrigue, P., Grossin, D., & Küçüktürk, G. (2026). Ceramic Slurry Design for Vat‐Photopolymerization of Turbine Blade Ceramic Cores: A Review. Journal of the American Ceramic Society, 109(10). https://doi.org/10.1111/jace.71322
Vancouver
Özeren E, Kaya B, Kaya D, Lagarrigue P, Grossin D, Küçüktürk G. Ceramic Slurry Design for Vat‐Photopolymerization of Turbine Blade Ceramic Cores: A Review. Journal of the American Ceramic Society. 2026;109(10). doi:10.1111/jace.71322
BibTeX
@article{zeren2026,
author = {Özeren, Emre and Kaya, Beyza and Kaya, Duran and Lagarrigue, Prescillia and Grossin, David and Küçüktürk, Gökhan},
title = {Ceramic Slurry Design for Vat‐Photopolymerization of Turbine Blade Ceramic Cores: A Review},
journal = {Journal of the American Ceramic Society},
year = {2026},
volume = {109},
number = {10},
doi = {10.1111/jace.71322}
}
EUVIMED