EUVIMEDEUVIMED entdecken
Crossref

Integral Hydro-Bulge Forming Method of Spherical Pressure Vessels Using a Triangle Patch Polyhedron

Yang Jing, Chenghai Kong, Jingchao Guan, Wei Zhao, Xilu Zhao

Journal of Pressure Vessel Technology · 01.06.2023 · 145 (3)

DOI: 10.1115/1.4062120 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Pressure Vessel Technology, online erschienen am 24.03.2023. Verfasst von Yang Jing und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper proposes an integral hydrobulge forming (IHBF) method using a triangular patch polyhedron as the closed preform shell. When triangular flat parts are welded along the edges in sequence, triangular patch polyhedra are naturally formed. From the radius of the spherical pressure vessel, a design formula was derived to calculate the side lengths of the triangular flat plate parts. The water pressure, water volume, average strain of molding, and amount of springback after molding, which are necessary for implementing the IHBF for practical use, were also formulated. To verify the forming performance of the spherical pressure vessel using IHBF method, the finite element method was carried out, and a stainless-steel spherical pressure vessel with a thickness of 1.0 mm and a diameter of approximately 500 mm was fabricated using the proposed IHBF method. As a result, the measured shape error expressed as roundness to diameter ratio was 0.52%, and the calculated average plastic strain was 0.02, which was approximately 1/19 times of the forming limit strain of the material. The amount of springback after forming by calculation was approximately 0.7 mm, indicating that the amount of water required for IHBF was 5.90% of the volume of the spherical pressure vessel, while the required water pressure was no bigger than 2.3 MPa. The process directly utilizes triangular flat plate parts, eliminating the need for molds to process closed preform shells resulting in a low average plastic strain during forming, thereby improving the quality of the formed spherical pressure vessels.

Zitieren

APA

Jing, Y., Kong, C., Guan, J., Zhao, W., & Zhao, X. (2023). Integral Hydro-Bulge Forming Method of Spherical Pressure Vessels Using a Triangle Patch Polyhedron. Journal of Pressure Vessel Technology, 145(3). https://doi.org/10.1115/1.4062120

Vancouver

Jing Y, Kong C, Guan J, Zhao W, Zhao X. Integral Hydro-Bulge Forming Method of Spherical Pressure Vessels Using a Triangle Patch Polyhedron. Journal of Pressure Vessel Technology. 2023;145(3). doi:10.1115/1.4062120

BibTeX
@article{Jing2023,
  author = {Jing, Yang and Kong, Chenghai and Guan, Jingchao and Zhao, Wei and Zhao, Xilu},
  title = {Integral Hydro-Bulge Forming Method of Spherical Pressure Vessels Using a Triangle Patch Polyhedron},
  journal = {Journal of Pressure Vessel Technology},
  year = {2023},
  volume = {145},
  number = {3},
  doi = {10.1115/1.4062120}
}
Kostenlos starten →