Drag Reduction for Flow Past Circular Cylinder Using Static Extended Trailing Edge
ASME Open Journal of Engineering · 01.01.2023 · 2
DOI: 10.1115/1.4057009 ↗Kurz gefasst
Fachartikel in der Zeitschrift ASME Open Journal of Engineering, online erschienen am 10.03.2023. Verfasst von Ayush Boral und 7 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 41 Literaturangaben.
Abstract (Originalsprache)
A numerical study has been carried out on the two-dimensional flow past a circular cylinder. In this case, a splitter plate is provided at the rear stagnation point in the downstream direction. ansys fluent has been used to carry out the numerical simulations based on finite volume method approach. Grid independence was achieved and the numerical model was validated with results available in open literature at Reynolds numbers of 100, 5000, and 100,000 respectively. In the present investigation, the characteristics of vortex shedding due to the presence of splitter plate in the circular cylinder were investigated. The main focus of this research was to find the optimal splitter plate length for low, moderate, and high Reynolds numbers. It was observed that at low, moderate, and high Reynolds numbers, the drag coefficient (cd) for optimal plate length decreased drastically as compared to the baseline circular cylinder case. Moreover, the fluctuating nature of lift coefficient (cl) had also ceased. This research work has a good potential to decrease time-varying structural loads on bluff bodies by decreasing the vortex shedding frequency and consequently decreasing drag. The scope of our research extends to structures of bridges and large vehicles, radiator pipes of heat exchangers, landing gears of aircraft, and many more.
Zitieren
APA
Boral, A., Dutta, S., Das, A., Kumar, A., Bej, N., Chaubdar, P., Das, B. N., & Harichandan, A. B. (2023). Drag Reduction for Flow Past Circular Cylinder Using Static Extended Trailing Edge. ASME Open Journal of Engineering, 2. https://doi.org/10.1115/1.4057009
Vancouver
Boral A, Dutta S, Das A, Kumar A, Bej N, Chaubdar P, et al. Drag Reduction for Flow Past Circular Cylinder Using Static Extended Trailing Edge. ASME Open Journal of Engineering. 2023;2. doi:10.1115/1.4057009
BibTeX
@article{Boral2023,
author = {Boral, Ayush and Dutta, Souvik and Das, Anwesha and Kumar, Ankit and Bej, Nilotpala and Chaubdar, Pooja and Das, Biranchi Narayana and Harichandan, Atal Bihari},
title = {Drag Reduction for Flow Past Circular Cylinder Using Static Extended Trailing Edge},
journal = {ASME Open Journal of Engineering},
year = {2023},
volume = {2},
doi = {10.1115/1.4057009}
}
EUVIMED