Blockage effect on flow and heat transfer for lead-bismuth eutectic cross-flow past a circular cylinder
Physics of Fluids · 01.11.2026 · 38 (11)
DOI: 10.1063/5.0354885 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 09.11.2026. Verfasst von Hongjun Zhu und 4 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Gefördert von: Sichuan Province Science and technology support program.
Abstract (Originalsprache)
This work numerically investigates the coupled thermal-hydraulic impacts of blockage ratio (β = 0.1–0.8) on lead-bismuth eutectic (LBE) cross-flow past an isothermal circular cylinder. Simulations are performed at a cylinder temperature TC = 773.15 K and a low inlet Reynolds number Rein = 150. Three distinct flow regimes emerge as the blockage ratio grows: symmetric vortex shedding (β ≤ 0.6), steady asymmetric flow (β = 0.7), and asymmetric vortex shedding (β = 0.8). The thermal boundary-layer thickness at the front stagnation point varies nonmonotonically with β. It initially decreases and subsequently increases, attaining its minimum value near β ≈ 0.3, which corresponds to the peak root-mean-square lift coefficient. Meanwhile, the thermal boundary-layer profile evolves from convex at low blockage ratios to concave at high blockage ratios. For low-Pr LBE, the convex-to-concave transition arises from confinement-induced velocity redistribution within the exceptionally thick thermal boundary layer, governed by the competition between centerline stagnation deceleration and gap-side acceleration. Single-property analysis further identifies temperature-dependent specific heat capacity as the dominant contributor to thermal boundary-layer thickening. The present study unveils the unusual evolution mechanism of thermal boundary layers for low-Prandtl-number fluids within confined domains. These results offer fundamental physical insights for the thermal-hydraulic design of confined structures in lead- or LBE-cooled reactor systems.
Förderung
- Sichuan Province Science and technology support program
Zitieren
APA
Zhu, H., Wang, W., Wu, T., Zhang, W., & Liang, R. (2026). Blockage effect on flow and heat transfer for lead-bismuth eutectic cross-flow past a circular cylinder. Physics of Fluids, 38(11). https://doi.org/10.1063/5.0354885
Vancouver
Zhu H, Wang W, Wu T, Zhang W, Liang R. Blockage effect on flow and heat transfer for lead-bismuth eutectic cross-flow past a circular cylinder. Physics of Fluids. 2026;38(11). doi:10.1063/5.0354885
BibTeX
@article{Zhu2026,
author = {Zhu, Hongjun and Wang, Weiyu and Wu, Tianhao and Zhang, Wenxiang and Liang, Ruofei},
title = {Blockage effect on flow and heat transfer for lead-bismuth eutectic cross-flow past a circular cylinder},
journal = {Physics of Fluids},
year = {2026},
volume = {38},
number = {11},
doi = {10.1063/5.0354885}
}
EUVIMED