EUVIMEDEUVIMED entdecken
Crossref

Mechanism of Axial Compressor Tip Clearance Noise Based on Taylor–Couette Flow Rotating Instability

Beom-Jin Joe, Min-Hyeok Kim, Suk-Yoon Hong, Jee-Hun Song

Journal of Turbomachinery · 01.02.2023 · 145 (2)

DOI: 10.1115/1.4055527 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 11.10.2022. Verfasst von Beom-Jin Joe und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 38 Literaturangaben. Gefördert von: Ministry of Education.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Prediction of the tip clearance noise (TCN) of axial compressors is essential to accurately determine the noise level of the compressor, because it is left unattenuated during propagation. The existing studies on numerical methods are inadequate for accurate determination of the TCN owing to the limited understanding of the physical phenomenon. The most convincing explanation is that the TCN is generated because of the instability in shear waves in the tip clearance region. In this study, the rotating instability theory was developed further by modeling the physical phenomenon of the instability as a Taylor–Couette (T–C) flow. The TCN sources were obtained using T–C flow modeling, and duct noise analysis was performed to obtain the TCN at various locations and frequencies. The TCN predictions were compared with the existing experimental results and noise results obtained using FW–H. Results showed that the T–C flow modeling is sufficiently accurate for predicting the frequencies, wavenumber distributions, and SPL of the tip clearance noise of axial compressors.

Förderung

  • Ministry of Education

Zitieren

APA

Joe, B., Kim, M., Hong, S., & Song, J. (2023). Mechanism of Axial Compressor Tip Clearance Noise Based on Taylor–Couette Flow Rotating Instability. Journal of Turbomachinery, 145(2). https://doi.org/10.1115/1.4055527

Vancouver

Joe B, Kim M, Hong S, Song J. Mechanism of Axial Compressor Tip Clearance Noise Based on Taylor–Couette Flow Rotating Instability. Journal of Turbomachinery. 2023;145(2). doi:10.1115/1.4055527

BibTeX
@article{Joe2023,
  author = {Joe, Beom-Jin and Kim, Min-Hyeok and Hong, Suk-Yoon and Song, Jee-Hun},
  title = {Mechanism of Axial Compressor Tip Clearance Noise Based on Taylor–Couette Flow Rotating Instability},
  journal = {Journal of Turbomachinery},
  year = {2023},
  volume = {145},
  number = {2},
  doi = {10.1115/1.4055527}
}
Kostenlos starten →