EUVIMEDEUVIMED entdecken
Crossref

Fabrication, Mechanics, and Reliability Analysis for Three-Dimensional Printed Lattice Designs

Nitin Nagesh Kulkarni, Stephen Ekwaro-Osire, Paul F. Egan

ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering · 01.03.2022 · 8 (1)

DOI: 10.1115/1.4051747 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering, online erschienen am 13.08.2021. Verfasst von Nitin Nagesh Kulkarni und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 57 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The use of three-dimensional (3D) printing for lattice structures has led to advances in diverse applications benefitting from mechanically efficient designs. Three-dimensional printed lattices are often used to carry loads, however, printing defects and inconsistencies potentially hinder performance. Here, we investigate the design, fabrication, mechanics, and reliability of lattices with repeating cubic unit cells using probabilistic analysis. Lattices were designed with 500 μm diameter beams and unit cell lengths from 0.8 mm to 1.6 mm. Designs were printed with stereolithography and had average beam diameters from 509 μm to 622 μm, thereby demonstrating a deviation from design intentions. Mechanical experiments were conducted and demonstrated an exponential increase in yield stress for lattice relative density that facilitated probabilistic failure analysis. Sensitivity analysis demonstrated lattice mechanics were most sensitive to fluctuations for beam diameter (74%) and second to lattice yield stress (8%) for lattices with 1.6 mm unit cells, while lattices with smaller 1.0 mm unit cells were most sensitive to yield stress (48%) and second to beam diameter (43%). The methodological framework is generalizable to further 3D printed lattice systems, and findings provide new insights linking design, fabrication, mechanics, and reliability for improved system design that is crucial for engineers to consider as 3D printing becomes more widely adopted.

Zitieren

APA

Kulkarni, N. N., Ekwaro-Osire, S., & Egan, P. F. (2022). Fabrication, Mechanics, and Reliability Analysis for Three-Dimensional Printed Lattice Designs. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering, 8(1). https://doi.org/10.1115/1.4051747

Vancouver

Kulkarni NN, Ekwaro-Osire S, Egan PF. Fabrication, Mechanics, and Reliability Analysis for Three-Dimensional Printed Lattice Designs. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering. 2022;8(1). doi:10.1115/1.4051747

BibTeX
@article{Kulkarni2022,
  author = {Kulkarni, Nitin Nagesh and Ekwaro-Osire, Stephen and Egan, Paul F.},
  title = {Fabrication, Mechanics, and Reliability Analysis for Three-Dimensional Printed Lattice Designs},
  journal = {ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering},
  year = {2022},
  volume = {8},
  number = {1},
  doi = {10.1115/1.4051747}
}
Kostenlos starten →