An evaluation of the usability and durability of 3D printed versus standard suture materials
Wound Repair and Regeneration · 2024
DOI: 10.1111/wrr.13175 ↗Kurz gefasst
Vergleichsstudie in der Zeitschrift Wound Repair and Regeneration, 2024. Verfasst von Thang T Nguyen und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Emergency Medicine, The University of Nebraska Medical Center, Omaha, Nebraska, USA. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Sutures, Suture Techniques, Tensile Strength. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 7 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Nebraska Medical Center-Department of Emergency Medicine.
Abstract (Originalsprache)
The capability to produce suture material using three‐dimensional (3D) printing technology may have applications in remote health facilities where rapid restocking of supplies is not an option. This is a feasibility study evaluating the usability of 3D‐printed sutures in the repair of a laceration wound when compared with standard suture material. The 3D‐printed suture material was manufactured using a fused deposition modelling 3D printer and nylon 3D printing filament. Study participants were tasked with performing laceration repairs on the pigs' feet, first with 3‐0 WeGo nylon suture material, followed by the 3D‐printed nylon suture material. Twenty‐six participants were enrolled in the study. Survey data demonstrated statistical significance with how well the 3D suture material performed with knot tying, 8.9 versus 7.5 ( p = 0.0018). Statistical significance was observed in the 3D‐printed suture's ultimate tensile strength when compared to the 3‐0 Novafil suture (274.8 vs. 199.8 MPa, p = 0.0096). The 3D‐printed suture also demonstrated statistical significance in ultimate extension when compared to commercial 3‐0 WeGo nylon suture (49% vs. 37%, p = 0.0215). This study was successful in using 3D printing technology to manufacture suture material and provided insight into its usability when compared to standard suture material.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Emergency Medicine, The University of Nebraska Medical Center, Omaha, Nebraska, USA.
- Department of Anesthesiology, The University of Nebraska Medical Center, Omaha, Nebraska, USA.
- Department of Neurosurgery, The University of Nebraska Medical Center, Omaha, Nebraska, USA.
- Department of Chemistry, The University of Nebraska Lincoln, Lincoln, Nebraska, USA.
ORCID-Profile: Thang T Nguyen
Förderung
- University of Nebraska Medical Center-Department of Emergency Medicine
Zitieren
APA
Nguyen, T. T., Langenfeld, J. G., Reinhart, B. C., Lyden, E. I., Campos, A. S., Wadman, M. C., Jamison, M. R., Morin, S. A., & Barksdale, A. N. (2024). An evaluation of the usability and durability of 3D printed versus standard suture materials. Wound Repair and Regeneration. https://doi.org/10.1111/wrr.13175
Vancouver
Nguyen TT, Langenfeld JG, Reinhart BC, Lyden EI, Campos AS, Wadman MC, et al. An evaluation of the usability and durability of 3D printed versus standard suture materials. Wound Repair and Regeneration. 2024. doi:10.1111/wrr.13175
BibTeX
@article{Nguyen2024,
author = {Nguyen, Thang T and Langenfeld, Jason G and Reinhart, Benjamin C and Lyden, Elizabeth I and Campos, Abraham S and Wadman, Michael C and Jamison, Matthew R and Morin, Stephen A and Barksdale, Aaron N},
title = {An evaluation of the usability and durability of 3D printed versus standard suture materials},
journal = {Wound Repair and Regeneration},
year = {2024},
doi = {10.1111/wrr.13175}
}
EUVIMED