EUVIMEDObjevte EUVIMED
Crossref

Sustainable microcrystalline cellulose extracted from biowaste Albezia lebeck L. leaves: Biomass exfoliation and physicochemical characterization

Murugesan Palaniappan iD

Physiologia Plantarum · 2024

DOI: 10.1111/ppl.14447 ↗

At a glance

Journal article in Physiologia Plantarum, 2024. Written by Murugesan Palaniappan. Institution: Department of Mechanical Engineering, College of Engineering, Imam Mohammad Ibn Saud Islamic University, Riyadh, Saudi Arabia. Major MEDLINE topics: Cellulose, Plant Leaves, Biomass. Cited 1 times so far (Crossref); 86 references.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

There is a focus on sustainability when manufacturing materials. Utilizing biobased materials and replacing fossil‐based products is the main research focus. Bio‐composite materials are applied to packaging, filler coatings, and pharmaceuticals. Here, we used the leaves of the agro‐waste plant Albizia lebeck L . to extract cellulose. Chemical treatment causing strong acid hydrolysis successfully extracted the cellulose content from the leaves. The cellulose obtained was then strengthened with polylactic acid to make a biobased film for future applications. Fourier transform spectroscopy, scanning electron microscopy, thermal analysis, particle size analysis, visible UV and elemental analysis were all used to characterize the extracted cellulose. SEM and mechanical property analysis were used to check and describe the quality of the reinforced biofilm. The greatest cellulose yield from this raw material was 50.2%. The crystallinity index and crystallite size (CI 70.3% and CS 11.29 nm) were high in the extracted cellulose. The TG (DTG) curve analysis derivative revealed cellulose particle breakdown was initiated around 305.2°C and can endure temperatures up to 600°C. Biofilms reinforced with polylactic acid cellulose (1, 2, 3, and 5% by weight %) exhibited a smooth and parallel surface. As the filler concentration increased, minor agglomeration occurred. The tensile strength of pure polylactic acid (PLA) (34.72 MPa) was extended up to 38.91 MPa for 5% filler. Similarly, Young's modulus also increased to 5.24 MPa. However, the elongation break decreases with the increase of filler content, and the least value of decrease is 7.5 MPa. Concerning prospective implementations, it is expected that the biobased film and cellulose particles will prove to be more functional.

Subjects

MeSH terms (MEDLINE)

CellulosePlant LeavesBiomassSpectroscopy, Fourier Transform InfraredMicroscopy, Electron, ScanningTensile StrengthPolyestersBiofilms

Substances

Cellulosemicrocrystalline cellulosePolyesterspoly(lactide)

Authors and institutions

  • Department of Mechanical Engineering, College of Engineering, Imam Mohammad Ibn Saud Islamic University, Riyadh, Saudi Arabia.

ORCID profiles: Murugesan Palaniappan

Cite

APA

Palaniappan, M. (2024). Sustainable microcrystalline cellulose extracted from biowaste Albezia lebeck L. leaves: Biomass exfoliation and physicochemical characterization. Physiologia Plantarum. https://doi.org/10.1111/ppl.14447

Vancouver

Palaniappan M. Sustainable microcrystalline cellulose extracted from biowaste Albezia lebeck L. leaves: Biomass exfoliation and physicochemical characterization. Physiologia Plantarum. 2024. doi:10.1111/ppl.14447

BibTeX
@article{Palaniappan2024,
  author = {Palaniappan, Murugesan},
  title = {Sustainable microcrystalline cellulose extracted from biowaste Albezia lebeck L. leaves: Biomass exfoliation and physicochemical characterization},
  journal = {Physiologia Plantarum},
  year = {2024},
  doi = {10.1111/ppl.14447}
}
Start for free →