Immobilized CuCl 2 / TiO 2 photocatalysts for the selective oxidation of benzyl alcohol to benzaldehyde
Photochemistry and Photobiology · 2026-09 · 102 (5) · 1220-1233
DOI: 10.1111/php.70072 ↗Kurz gefasst
Fachartikel in der Zeitschrift Photochemistry and Photobiology, online erschienen am 27.01.2026. Verfasst von Nosaibeh Nosrati-Ghods und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Faculty of Engineering and the Built Environment, University of Cape Town, Cape Town, South Africa. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: National Research Foundation of South Africa, Slovenian Research and Innovation Agency through Core Research Funding.
Abstract (Originalsprache)
The oxidation of alcohols to aldehydes is a key transformation in industrial chemistry, as aldehydes are vital intermediates in the synthesis of pharmaceuticals and fine chemicals. Conventional oxidation routes typically employ stoichiometric and corrosive oxidants, generating significant environmental concerns. Greener oxidants such as molecular oxygen (O 2 ) offer a more sustainable alternative to stoichiometric oxidants; however, their efficient utilization requires activation by catalysts (e.g., Cu‐, Pd‐, Au‐, or Ti‐based systems). Homogeneous photocatalysts such as CuCl 2 exhibit promising activity under light irradiation but are limited by challenges in separation and recycling. This study investigates the immobilization of CuCl 2 and TiO 2 (P25) within sodium alginate beads to facilitate photocatalyst recovery and minimize metal leaching. Under UV irradiation for 4 h, benzyl alcohol conversions of 54% (P25) and 49% (CuCl 2 ) were achieved. Catalyst encapsulation markedly reduced activity due to internal mass transport limitations, as restricted diffusion of O 2 and benzyl alcohol within the bead matrix limited access to active sites and suppressed overall reaction rates. Co‐immobilization of P25 and CuCl 2 partially restored conversion (22%), while maintaining high benzaldehyde selectivity (≈1 after 4 h) across all systems. These findings highlight oxygen depletion and mass transfer resistance as key constraints in bead‐based photocatalysts. To guide further optimization, a MATLAB‐based reactor model incorporating species transport, interfacial mass transfer, and kinetics was developed.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical Engineering, Faculty of Engineering and the Built Environment, University of Cape Town, Cape Town, South Africa.
- Faculty of Chemistry and Chemical Engineering, Maribor University, Maribor, Slovenia.
ORCID-Profile: Nosaibeh Nosrati-Ghods
Förderung
- National Research Foundation of South Africa
- Slovenian Research and Innovation Agency through Core Research Funding
Zitieren
APA
Nosrati-Ghods, N., Čuček, L., Moradi, H., & van Steen, E. (2026). Immobilized CuCl 2 / TiO 2 photocatalysts for the selective oxidation of benzyl alcohol to benzaldehyde. Photochemistry and Photobiology, 102(5), 1220-1233. https://doi.org/10.1111/php.70072
Vancouver
Nosrati-Ghods N, Čuček L, Moradi H, van Steen E. Immobilized CuCl 2 / TiO 2 photocatalysts for the selective oxidation of benzyl alcohol to benzaldehyde. Photochemistry and Photobiology. 2026;102(5):1220-1233. doi:10.1111/php.70072
BibTeX
@article{NosratiGhods2026,
author = {Nosrati-Ghods, Nosaibeh and Čuček, Lidija and Moradi, Hamidreza and van Steen, Eric},
title = {Immobilized CuCl 2 / TiO 2 photocatalysts for the selective oxidation of benzyl alcohol to benzaldehyde},
journal = {Photochemistry and Photobiology},
year = {2026},
volume = {102},
number = {5},
pages = {1220--1233},
doi = {10.1111/php.70072}
}
EUVIMED