EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Novel 3D ‐Printed Strut‐Type Prosthesis Reconstructs the Hemicortical Defect After Distal Femur Parosteal Osteosarcoma Resection: The Mid‐Term Follow‐Up Outcome

Jianhua Mu iD, Yitian Wang, Han Liu iD, Xuanhong He, Zhuangzhuang Li iD, Minxun Lu, Fan Tang, Yi Luo iD, Yong Zhou, Li Min, Chongqi Tu iD

Orthopaedic Surgery · 2026-08 · 18 (8) · 1668-1678

DOI: 10.1111/os.70360 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Orthopaedic Surgery, online erschienen am 18.06.2026. Verfasst von Jianhua Mu und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopedics, Orthopeadic Research Institute, West China Hospital, West China Medical School, Sichuan University, Chengdu, Sichuan, Chin…. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Femoral Neoplasms, Prosthesis Design, Osteosarcoma. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Parosteal osteosarcoma (PAOS) is a rare and low‐grade primary bone malignant tumor that typically occurs in the distal femur. Traditional reconstruction options for distal femur PAOS include distal femoral replacement (DFR), autografts, and allografts, but issues such as functional sacrifice, insufficient mechanical strength, and low bone union rate limit their further clinical application. 3D‐printed prosthesis, due to the matching shape of various bone defects, could be a novel strategy to reconstruct the hemicortical defect after distal femur PAOS tumor resection. In this study, we designed a 3D‐printed strut‐type prosthesis (3DPSP) to repair the hemicortical defect and evaluated the mid‐term effect in distal femur PAOS.

Methods

A retrospective analysis was conducted on patients diagnosed with PAOS at the distal femur between April 2018 and January 2021. Six patients received DFR and six patients received customized 3DPSP reconstruction. Clinical outcomes including oncology status, defect lengths, and ranges of motion of the knee, Musculoskeletal Tumor Society (MSTS) scores, and complications were recorded. X‐ray was performed to evaluate the position and stability of the prosthesis and T‐SMART was applied to assess the interface osteointegration between prosthesis and bone.

Results

A total of 12 patients were enrolled in this study with an average follow‐up of 42.1 ± 11.8 months, ranging from 22 to 59 months. In the 3DPSP group, the average operation time was 2.3 ± 0.4 h; the intraoperative blood loss was 175.0 ± 82.2 mL. The average range of motion of the knee was 0°–123° and the mean MSTS score was 28.3 ± 1.6. Compared to the DFR group, the 3DPSP group exhibited significantly less intraoperative blood loss and superior functional recovery.

Conclusions

In this study, we designed a novel 3DPSP to reconstruct the hemicortical defect after distal femur PAOS resection. The mid‐term follow‐up result demonstrated that this prosthesis could be an effective reconstruction option for distal femur PAOS patients because of the restored limb function and favorable bone‐prosthesis integration. Further observation of this novel prosthesis is needed.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalFemoral NeoplasmsProsthesis DesignOsteosarcomaFemurPlastic Surgery ProceduresBone NeoplasmsHumansRetrospective StudiesFemaleFollow-Up StudiesMaleAdolescentAdultYoung AdultOsteosarcoma, Juxtacortical

Stichwörter der Autor:innen

3D‐printed prosthesishemicortical resectionmetaphysis of the distal femurparosteal osteosarcomareconstruction

Autor:innen und Institutionen

  • Department of Orthopedics, Orthopeadic Research Institute, West China Hospital, West China Medical School, Sichuan University, Chengdu, Sichuan, China.
  • Model Worker and Craftsman Talent Innovation Workshop of Sichuan Province, West China Hospital, Sichuan University, Chengdu, Sichuan, China.

ORCID-Profile: Jianhua Mu, Han Liu, Zhuangzhuang Li, Yi Luo, Chongqi Tu

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Mu, J., Wang, Y., Liu, H., He, X., Li, Z., Lu, M., Tang, F., Luo, Y., Zhou, Y., Min, L., & Tu, C. (2026). A Novel 3D ‐Printed Strut‐Type Prosthesis Reconstructs the Hemicortical Defect After Distal Femur Parosteal Osteosarcoma Resection: The Mid‐Term Follow‐Up Outcome. Orthopaedic Surgery, 18(8), 1668-1678. https://doi.org/10.1111/os.70360

Vancouver

Mu J, Wang Y, Liu H, He X, Li Z, Lu M, et al. A Novel 3D ‐Printed Strut‐Type Prosthesis Reconstructs the Hemicortical Defect After Distal Femur Parosteal Osteosarcoma Resection: The Mid‐Term Follow‐Up Outcome. Orthopaedic Surgery. 2026;18(8):1668-1678. doi:10.1111/os.70360

BibTeX
@article{Mu2026,
  author = {Mu, Jianhua and Wang, Yitian and Liu, Han and He, Xuanhong and Li, Zhuangzhuang and Lu, Minxun and Tang, Fan and Luo, Yi and Zhou, Yong and Min, Li and Tu, Chongqi},
  title = {A Novel 3D ‐Printed Strut‐Type Prosthesis Reconstructs the Hemicortical Defect After Distal Femur Parosteal Osteosarcoma Resection: The Mid‐Term Follow‐Up Outcome},
  journal = {Orthopaedic Surgery},
  year = {2026},
  volume = {18},
  number = {8},
  pages = {1668--1678},
  doi = {10.1111/os.70360}
}
Kostenlos starten →