In-house three dimensional-printed cutting guides improve surgical accuracy in children who underwent resection of malignant bone tumours of lower limb and reconstruction with allograft
In-house 3D-gedruckte Schneidführungen verbessern die chirurgische Genauigkeit bei Kindern nach Resektion maligner Knochentumoren der unteren Extremität und Rekonstruktion mit Allograft
International Orthopaedics · 2026-05 · 50 (5) · 1155-1163
DOI: 10.1007/s00264-026-06773-8 ↗Auf einen Blick
Bei 7 Kindern mit malignen Knochentumoren der unteren Extremität waren Resektion und Passform des Allografts mit in-house 3D-gedruckten Instrumenten präzise. Alle Resektionen erreichten R0-Ränder.
Fragestellung
Wie genau sind Resektion und Passform von Knochenallografts bei Kindern mit malignen Knochentumoren der unteren Extremität unter Einsatz in-house 3D-gedruckter patientenspezifischer Instrumente?
Methode
Retrospektive Studie bei 7 Kindern mit malignen Knochentumoren der unteren Extremität; Resektion und Rekonstruktion mit in-house 3D-gedruckten PSIs und GSIs zwischen September 2023 und März 2025.
Ergebnisse
Alle Resektionen erreichten R0-Ränder. Geplante Resektionslänge median 16,5 cm, tatsächlich 16,8 cm; mediane Differenz 0,2 cm. Knochenheilung an 13 von 14 Osteotomieflächen (92,9 %); ein verzögerter Heilungsfall (7,1 %).
Schlussfolgerung der Autor:innen
3D-gedruckte PSIs und GSIs scheinen die Genauigkeit der Knochentumorresektion und die Passform zwischen Wirtsknochen und MBA zu verbessern und damit das Risiko unzureichender Ränder und fehlender Knochenheilung zu senken.
Kernaussagen
- R0-Ränder bei allen Resektionen
- Knochenheilung an 13 von 14 Osteotomieflächen
- Mediane Differenz zwischen geplant und reseziert: 0,2 cm
Deutsche Zusammenfassung: KI-gestützt aus dem Original-Abstract erstellt; alle Zahlen wurden automatisch mit dem Original abgeglichen. Maßgeblich ist der Original-Abstract.
Kurz gefasst
Fachartikel in der Zeitschrift International Orthopaedics, online erschienen am 17.03.2026. Verfasst von Eiji Nakata und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopedic Surgery, Okayama University Hospital, Okayama city, Japan. eijinakata8522@yahoo.co.jp. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Bone Neoplasms, Bone Transplantation, Plastic Surgery Procedures. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: JSPS KAKENHI, Okayama University.
Themen: Kinderkrankenpflege
Abstract (Originalsprache)
Aims
This study evaluated the accuracy of resection of bone tumours and the fit between host bone and massive bone allograft (MBA) in children with malignant bone tumours of lower limb who underwent surgery using in-house 3-dimensional (3D)-printed patient-specific instruments (PSIs) for tumour resection and graft-specific instruments (GSIs) for shaping the MBA.
Methods
This retrospective study included seven children (3 males, 4 females; median age 13) with malignant bone tumours of the lower limb who underwent intercalary resection and reconstruction with MBA between September 2023 and March 2025 using in-house designed 3D-printed PSIs and GSIs. Tumours were located in the femur (5 children) and tibia (2 children). We analysed the accuracy of bone resection, complications of reconstruction, and function of patients.
Results
All resections achieved R0 margins. The median planned resection length was 16.5 cm versus 16.8 cm actually resected (median difference 0.2 cm). Bone union was achieved in 13 of 14 (92.9%) osteotomy sites. Bone union was faster at metaphyseal junctions (median 5.9 months) than diaphyseal junctions (median 8.4 months) ( p = 0.01). One of the osteotomy sites (7.1%) had a delayed union requiring secondary bone grafting. The median Musculoskeletal Tumour Society score was 30 at the last follow-up.
Conclusion
3D-printed PSIs and GSIs appear to enhance the accuracy of bone tumour resection and host bone-MBA fit, thereby reducing the risks of inadequate margins and non-union, respectively.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Orthopedic Surgery, Okayama University Hospital, Okayama city, Japan. eijinakata8522@yahoo.co.jp.
- Orthopaedic Service, Musculoskeletal Oncology Department., IRCCS Istituto Ortopedico Rizzoli, Bologna, Italy. eijinakata8522@yahoo.co.jp.
- Unit of Pediatric Orthopedics and Traumatology, IRCCS Istituto Ortopedico Rizzoli, Bologna, Italy.
- Orthopaedic Service, Musculoskeletal Oncology Department., IRCCS Istituto Ortopedico Rizzoli, Bologna, Italy.
- Department of Orthopedic Surgery, Okayama University Hospital, Okayama city, Japan.
Förderung
- JSPS KAKENHI
- Okayama University
Zitieren
APA
Nakata, E., Alessandri, G., Menozzi, G. C., Aso, A., Ozaki, T., Trisolino, G., Donati, D. M., & Errani, C. (2026). In-house three dimensional-printed cutting guides improve surgical accuracy in children who underwent resection of malignant bone tumours of lower limb and reconstruction with allograft. International Orthopaedics, 50(5), 1155-1163. https://doi.org/10.1007/s00264-026-06773-8
Vancouver
Nakata E, Alessandri G, Menozzi GC, Aso A, Ozaki T, Trisolino G, et al. In-house three dimensional-printed cutting guides improve surgical accuracy in children who underwent resection of malignant bone tumours of lower limb and reconstruction with allograft. International Orthopaedics. 2026;50(5):1155-1163. doi:10.1007/s00264-026-06773-8
BibTeX
@article{Nakata2026,
author = {Nakata, Eiji and Alessandri, Giulia and Menozzi, Grazia Chiara and Aso, Ayano and Ozaki, Toshifumi and Trisolino, Giovanni and Donati, Davide Maria and Errani, Costantino},
title = {In-house three dimensional-printed cutting guides improve surgical accuracy in children who underwent resection of malignant bone tumours of lower limb and reconstruction with allograft},
journal = {International Orthopaedics},
year = {2026},
volume = {50},
number = {5},
pages = {1155--1163},
doi = {10.1007/s00264-026-06773-8}
}
EUVIMED