EUVIMEDOpdag EUVIMED
Open access · CC BY-NC 4.0

Stress Distribution of Different Pedicle Screw Insertion Techniques Following Single‐Segment TLIF : A Finite Element Analysis Study

Simengge Yang, Tianze Sun iD, Liwen Zhang, Menglin Cong, Anyun Guo, Dakai Liu iD, Mingzhi Song iD

Orthopaedic Surgery · 2023-04 · 15 (4) · 1153-1164

DOI: 10.1111/os.13671 ↗

At a glance

Journal article in Orthopaedic Surgery, 2023-03. Written by Simengge Yang and 6 co-authors. Institution: Department of Orthopaedics, The First Affiliated Hospital of Dalian Medical University, Dalian, China. Major MEDLINE topics: Pedicle Screws, Spinal Fusion, Lumbar Vertebrae, Stress, Mechanical. Cited 11 times so far (Crossref); 55 references. The full text is freely available (open access, CC BY-NC 4.0). Funded by: National Natural Science Foundation of China, Young Innovative Talents Project of Guangdong General Universities, The National Science Fund for Distinguished Young Scholars.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Objectives

At present, a variety of posterior lumbar internal fixation implantation methods have been developed, which makes it difficult for spine surgeons to choose. The stress distribution of the internal fixation system is one of the important indexes to evaluate these technologies. Common insertion technologies include Roy Camille, Magerl, Krag, AO, and Weinstein insertion techniques. This study aimed to compare the distribution of von Mises stresses in different screw fixation systems established by these insertion technologies.

Methods

Here, the three‐dimensional finite element (FE) method was selected to evaluate the postoperative stress distribution of internal fixation. Following different pedicle screw insertion techniques, five single‐segment transforaminal lumbar interbody fusion (TLIF) models were established after modeling and validation of the L1‐S1 vertebrae FE model.

Results

By analyzing the data, we found that stress concentration phenomenon was in all the models. Additionally, Roy‐Camille, Krag, AO, and Weinstein insertion techniques led to the great stress on lumbar vertebra, intervertebral disc, and screw‐rod fixation systems. Therefore, we hope that the results can provide ideas for clinical work and development of pedicle screws in the future. It is worth noting that flexion, unaffected side lateral bending, and affected side axial rotation should be limited for the patients with cages implanted.

Conclusions

Overall, our method obtained the results that Magerl insertion technique was the relatively safe approach for pedicle screw implantation due to its relatively dispersive stress in TLIF models.

Subjects

MeSH terms (MEDLINE)

Pedicle ScrewsSpinal FusionLumbar VertebraeStress, MechanicalFracture Fixation, InternalFinite Element AnalysisInternal Fixators

Author keywords

Finite Element AnalysisPedicle ScrewScrew and Rod SystemSpinal BiomechanicsStress

Authors and institutions

  • Department of Orthopaedics, The First Affiliated Hospital of Dalian Medical University, Dalian, China.
  • Department of Orthopedics, The Second Xiangya Hospital of Central South University, Changsha, China.
  • Department of Orthopedics, Qilu Hospital of Shandong University, Jinan, China.
  • Department of Joint Trauma, General Hospital of Shenzhen University, Shenzhen, China.
  • Department of Orthopaedics, The Second People's Hospital of Dalian, Dalian, China.
  • Department of Orthopaedics, The Third Affiliated Hospital of Dalian Medical University, Dalian, China.

ORCID profiles: Tianze Sun, Dakai Liu, Mingzhi Song

Funding

  • National Natural Science Foundation of China
  • Young Innovative Talents Project of Guangdong General Universities
  • The National Science Fund for Distinguished Young Scholars

Cite

APA

Yang, S., Sun, T., Zhang, L., Cong, M., Guo, A., Liu, D., & Song, M. (2023). Stress Distribution of Different Pedicle Screw Insertion Techniques Following Single‐Segment TLIF : A Finite Element Analysis Study. Orthopaedic Surgery, 15(4), 1153-1164. https://doi.org/10.1111/os.13671

Vancouver

Yang S, Sun T, Zhang L, Cong M, Guo A, Liu D, et al. Stress Distribution of Different Pedicle Screw Insertion Techniques Following Single‐Segment TLIF : A Finite Element Analysis Study. Orthopaedic Surgery. 2023;15(4):1153-1164. doi:10.1111/os.13671

BibTeX
@article{Yang2023,
  author = {Yang, Simengge and Sun, Tianze and Zhang, Liwen and Cong, Menglin and Guo, Anyun and Liu, Dakai and Song, Mingzhi},
  title = {Stress Distribution of Different Pedicle Screw Insertion Techniques Following Single‐Segment TLIF : A Finite Element Analysis Study},
  journal = {Orthopaedic Surgery},
  year = {2023},
  volume = {15},
  number = {4},
  pages = {1153--1164},
  doi = {10.1111/os.13671}
}
Start for free →