EUVIMEDEUVIMED entdecken
Crossref

Effect of food‐simulating liquids on Martens parameters of denture base resins with different manufacturing techniques

Abdulaziz Alhotan iD, Ahmed Altarazi iD, Shaymaa Mudhaffer iD, Hanan Al-Johani iD, Nick Silikas iD

Journal of Prosthodontics · 17.11.2026

DOI: 10.1111/jopr.70275 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Prosthodontics, online erschienen am 17.11.2026. Verfasst von Abdulaziz Alhotan und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Dental Health, College of Applied Medical Sciences, King Saud University, Riyadh, Saudi Arabia. Die Arbeit nennt 49 Literaturangaben. Gefördert von: King Saud University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

The purpose of this in vitro study was to evaluate the effects of food‐simulating liquids (FSLs) on Martens parameters of heat‐polymerized (HP), subtractively manufactured (SM), and additively manufactured (AM) denture base resins after different aging periods. Materials and Methods Three denture base resins, HP (Lucitone 199), SM (G‐CAM), and AM (Denturetec), were tested. Specimens (Ø10 × 2 mm, n = 5) were immersed in artificial saliva, citric acid, or ethanol at 37°C for 24 ( T 24 ) and 168 h ( T 168 ). Martens hardness ( H M ), indentation modulus ( E IT ), indentation depth ( I D ), and indentation creep ( C IT ) were measured using instrumented indentation testing. Baseline data analysis was done with one‐way ANOVA, and a generalized linear model was used for analysis at T 24 and T 168 ( α = 0.05).

Results

Material type, FSL type, and time point significantly affected all Martens parameters ( p < 0.001). SM resins exhibited the highest H M and E IT ( p < 0.001). AM resins showed the lowest baseline H M and highest baseline I D ( p ≤ 0.003). Ethanol significantly reduced H M and E IT at T 168 ( p ≤ 0.001). HP resins aged in ethanol had the greatest I D and C IT at T 168 ( p < 0.001).

Conclusions

SM resins exhibited superior resistance to indentation when exposed to FSLs. Ethanol caused significant degradation in Martens parameters of HP resins.

Schlagwörter

Stichwörter der Autor:innen

3D printingMartens hardnessadditive manufacturingdenture base resinfood‐simulating liquids

Autor:innen und Institutionen

  • Department of Dental Health, College of Applied Medical Sciences, King Saud University, Riyadh, Saudi Arabia.
  • Department of Restorative Dentistry, Faculty of Dentistry, Taibah University, Madinah, Saudi Arabia.
  • Department of Substitutive Dental Sciences, Faculty of Dentistry, Taibah University, Madinah, Saudi Arabia.
  • Department of Restorative Dentistry, Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia.
  • Division of Dentistry, School of Medical Sciences, University of Manchester, Manchester, UK.

ORCID-Profile: Abdulaziz Alhotan, Ahmed Altarazi, Shaymaa Mudhaffer, Hanan Al-Johani, Nick Silikas

Förderung

  • King Saud University

Zitieren

APA

Alhotan, A., Altarazi, A., Mudhaffer, S., Al-Johani, H., & Silikas, N. (2026). Effect of food‐simulating liquids on Martens parameters of denture base resins with different manufacturing techniques. Journal of Prosthodontics. https://doi.org/10.1111/jopr.70275

Vancouver

Alhotan A, Altarazi A, Mudhaffer S, Al-Johani H, Silikas N. Effect of food‐simulating liquids on Martens parameters of denture base resins with different manufacturing techniques. Journal of Prosthodontics. 2026. doi:10.1111/jopr.70275

BibTeX
@article{Alhotan2026,
  author = {Alhotan, Abdulaziz and Altarazi, Ahmed and Mudhaffer, Shaymaa and Al-Johani, Hanan and Silikas, Nick},
  title = {Effect of food‐simulating liquids on Martens parameters of denture base resins with different manufacturing techniques},
  journal = {Journal of Prosthodontics},
  year = {2026},
  doi = {10.1111/jopr.70275}
}
Kostenlos starten →