EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Influence of implant configuration on stress distribution in quad zygoma implant systems: A finite element analysis

Ercin Samunahmetoglu iD, Ilgın Ari iD, Arzum Yilmaz iD

Journal of Prosthodontics · 21.08.2026

DOI: 10.1111/jopr.70225 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Prosthodontics, online erschienen am 21.08.2026. Verfasst von Ercin Samunahmetoglu und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Dentistry, Oral and Maxillofacial Radiology Department, Yozgat Bozok University, Yozgat, Türkiye. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

This study aimed to evaluate the effect of different zygomatic implant configurations on the biomechanical behavior of implant‐supported prosthetic systems under varying bone conditions using finite element analysis. Materials and Methods Four three‐dimensional (3D) finite element models were developed based on two different anatomical conditions representing Zygoma Anatomy Guided Approach (ZAGA) Type 1 and Type 3. In each ZAGA type, two implant configurations were created by positioning zygomatic implants in different regions: lateral incisor–first molar and first premolar–first molar. All models were subjected to vertical and oblique loading conditions. Stress distribution in the peri‐implant bone, implants, abutments, and metal framework, as well as implant displacement, was analyzed.

Results

Under vertical loading conditions, Models 2 and 4 demonstrated lower stress values and more balanced load distribution, whereas Models 1 and 3 exhibited higher stress concentrations. In contrast, under oblique loading conditions, Models 1 and 3 showed more favorable stress values compared to Models 2 and 4. Implant displacement values were generally higher in Models 2 and 4. Within the limitations of the present finite element analysis, overall biomechanical response patterns were broadly comparable between the ZAGA Type 1 and Type 3 conditions.

Conclusion

Implant configuration appeared to influence the biomechanical behavior of quad zygomatic implant systems under the tested loading conditions. Models 1 and 3 generally showed a more favorable response under oblique loading, whereas the corresponding models in ZAGA Type 1 and Type 3 exhibited broadly comparable biomechanical patterns.

Schlagwörter

Stichwörter der Autor:innen

ZAGA classificationfinite element analysisimplant configurationzygomatic implants

Autor:innen und Institutionen

  • Faculty of Dentistry, Oral and Maxillofacial Radiology Department, Yozgat Bozok University, Yozgat, Türkiye.
  • Faculty of Dentistry, Oral and Maxillofacial Surgery Department, Kırıkkale University, Kırıkkale, Türkiye.
  • Faculty of Dentistry, Oral and Maxillofacial Surgery Department, Gazi University, Ankara, Türkiye.

ORCID-Profile: Ercin Samunahmetoglu, Ilgın Ari, Arzum Yilmaz

Zitieren

APA

Samunahmetoglu, E., Ari, I., & Yilmaz, A. (2026). Influence of implant configuration on stress distribution in quad zygoma implant systems: A finite element analysis. Journal of Prosthodontics. https://doi.org/10.1111/jopr.70225

Vancouver

Samunahmetoglu E, Ari I, Yilmaz A. Influence of implant configuration on stress distribution in quad zygoma implant systems: A finite element analysis. Journal of Prosthodontics. 2026. doi:10.1111/jopr.70225

BibTeX
@article{Samunahmetoglu2026,
  author = {Samunahmetoglu, Ercin and Ari, Ilgın and Yilmaz, Arzum},
  title = {Influence of implant configuration on stress distribution in quad zygoma implant systems: A finite element analysis},
  journal = {Journal of Prosthodontics},
  year = {2026},
  doi = {10.1111/jopr.70225}
}
Kostenlos starten →