Impact of conservative and traditional endodontic accesses on the strength of maxillary zirconia crowns
Journal of Prosthodontics · 2025
DOI: 10.1111/jopr.70082 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Prosthodontics, 2025. Verfasst von Carlos A Jurado und 7 weiteren Autor:innen. Beteiligte Einrichtung: Division of Operative Dentistry, Department of General Dentistry, College of Dentistry, The University of Tennessee Health Science Center, Memphis, T…. Hauptthemen laut MEDLINE: Zirconium, Crowns, Dental Prosthesis Design, Dental Materials. Die Arbeit nennt 43 Literaturangaben.
Abstract (Originalsprache)
Purpose
Performing endodontic procedures on existing crowns is common when replacing the crown is not feasible. Traditional triangular access (TTA) is standard for maxillary molars, but more conservative designs are reported in the literature. However, research comparing the fracture resistance of maxillary molar zirconia crowns using traditional and novel endodontic access sealed with composite resin remains limited. The purpose of this in vitro study was to evaluate the fracture resistance of maxillary molar zirconia crowns with various endodontic cavity designs: traditional triangular access (TTA), conservative triangular access (CTA), and conservative circular access (CCA). A control group with no endodontic access (NEA) was also included. Materials and Methods A maxillary right first molar typodont tooth was prepared for a full all‐ceramic crown. The preparation was scanned, and 48 dies were 3D‐printed based on the tooth preparation. A total of 48 zirconia crowns were fabricated ( n = 12 per group) and divided into four groups according to the endodontic access cavity design: TTA, CTA, CCA, and a control group without an endodontic cavity. To ensure consistency, all restorations were designed and fabricated using a digital workflow. Endodontic access was created using a specialized bur kit and sealed using a repair kit for damaged ceramic restorations along with resin composite. The restorations were cemented, and all samples underwent artificial aging with 10,000 thermal cycles between 5°C and 55°C, with a dwell time of 30 s. The samples were then loaded to failure using a universal testing machine. The maximum load to fracture was analyzed using a one‐way ANOVA and post hoc Tukey honestly significant difference (HSD) test ( α = 0.001). Additionally, the fracture patterns of the specimens were evaluated descriptively using a scanning electron microscope.
Results
The mean fracture resistance of maxillary molar zirconia crowns varied significantly by endodontic access type. CCA showed the highest resistance (3677 N) among access groups, followed by CTA (3385 N) and TTA (2927 N). The control group NEA (3834 N) exhibited the highest overall resistance, exceeding all access groups.
Conclusions
Conservative access designs increased the fracture resistance of zirconia crowns compared with traditional access, with circular access showing the highest strength. However, all access preparations reduced resistance relative to crowns without endodontic access.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Division of Operative Dentistry, Department of General Dentistry, College of Dentistry, The University of Tennessee Health Science Center, Memphis, Tennessee, USA.
- School of Dentistry, Ponce Health Sciences University, Ponce, Puerto Rico, USA.
- College of Dentistry, The University of Tennessee Health Science Center, Memphis, Tennessee, USA.
- Faculty of Dentistry, Department of Operative and Esthetic Dentistry, University of Szeged, Szeged, Hungary.
- Division of Dental Biomaterials, Department of Clinical and Community Sciences, School of Dentistry, The University of Alabama at Birmingham, Birmingham, Alabama, USA.
- Division of Restorative and Prosthetic Dentistry, College of Dentistry, The Ohio State University, Columbus, Ohio, USA.
ORCID-Profile: Carlos A Jurado, Mark Antal, Silvia Rojas-Rueda, Francisco X Azpiazu-Flores, Damian J Lee
Zitieren
APA
Jurado, C. A., Morrice, G., Antal, M., Rojas-Rueda, S., Azpiazu-Flores, F. X., Morrow, B. R., Garcia-Godoy, F., & Lee, D. J. (2025). Impact of conservative and traditional endodontic accesses on the strength of maxillary zirconia crowns. Journal of Prosthodontics. https://doi.org/10.1111/jopr.70082
Vancouver
Jurado CA, Morrice G, Antal M, Rojas-Rueda S, Azpiazu-Flores FX, Morrow BR, et al. Impact of conservative and traditional endodontic accesses on the strength of maxillary zirconia crowns. Journal of Prosthodontics. 2025. doi:10.1111/jopr.70082
BibTeX
@article{Jurado2025,
author = {Jurado, Carlos A and Morrice, Gustavo and Antal, Mark and Rojas-Rueda, Silvia and Azpiazu-Flores, Francisco X and Morrow, Brian R and Garcia-Godoy, Franklin and Lee, Damian J},
title = {Impact of conservative and traditional endodontic accesses on the strength of maxillary zirconia crowns},
journal = {Journal of Prosthodontics},
year = {2025},
doi = {10.1111/jopr.70082}
}
EUVIMED