EUVIMEDEUVIMED entdecken
Crossref

Impact of endodontic access design on the fracture resistance of zirconia mandibular molar crowns

Salahaldeen Abuhammoud, Carlos A Jurado iD, Silvia Rojas-Rueda iD, Rene Garcia-Contreras iD, Daniel Vegh, Damian J Lee iD

Journal of Prosthodontics · 2026

DOI: 10.1111/jopr.70047 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Prosthodontics, 2026. Verfasst von Salahaldeen Abuhammoud und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, The University of Iowa College of Dentistry and Dental Clinics, Iowa City, Iowa, USA. Hauptthemen laut MEDLINE: Zirconium, Crowns, Molar, Dental Prosthesis Design. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 41 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

This in vitro study aimed to evaluate and compare the fracture resistance of zirconia mandibular molar crowns with the traditional trapezoidal (TT) shaped access and three novel conservative access designs. The designs tested were the TT, conservative trapezoidal (CT), ultraconservative circular (UC), and two conservative single accesses (TC). Materials and Methods A mandibular right first molar typodont tooth was prepared for a full coverage zirconia crown. The preparation was scanned, and a total of 56 monolithic zirconia crowns were milled. Resin dies were printed for each restoration. Crowns were cemented with dual curing resin cement to the printed dies. The specimens were artificially aged with 10,000 thermal cycles between 5°C and 55°C with a dwell time of 30 s and were loaded to failure using a universal testing machine. Furthermore, scanning electron microscope (SEM) images were taken to evaluate the fracture patterns of the specimens. The fracture load was analyzed using the Shapiro‐Wilks normality test, followed by a one‐way ANOVA with a post hoc Tukey test.

Results

The fracture resistance of mandibular molar zirconia crowns significantly varied according to the endodontic access cavity design. Crowns with UC access had the highest fracture resistance (2722 ± 113 N, p < 0.001), followed by the CT (2469 ± 126 N) and the TT access (1915 ± 71 N). The two‐conservative single access design had the lowest value (1064 + 129 N).

Conclusions

All endodontic access designs for mandibular molar zirconia crowns appeared to withstand the average occlusal forces. Crowns with UC access demonstrated the highest fracture resistance among different endodontic access designs. Two conservative single accesses in the same crowns significantly diminished the fracture resistance.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ZirconiumCrownsMolarDental Prosthesis DesignDental Restoration FailureDental MaterialsHumansMandibleDental Stress AnalysisIn Vitro TechniquesMaterials Testing

Stichwörter der Autor:innen

accesscrownendodonticfracture molarzirconia

Substanzen

Zirconiumzirconium oxideDental Materials

Autor:innen und Institutionen

  • Department of Prosthodontics, The University of Iowa College of Dentistry and Dental Clinics, Iowa City, Iowa, USA.
  • Division of Operative Dentistry, Department of General Dentistry, The University of Tennessee Health Science Center College of Dentistry, Memphis, Tennessee, USA.
  • Division of Dental Biomaterials, The University of Alabama at Birmingham School of Dentistry, Birmingham, Alabama, USA.
  • Interdisciplinary Research Laboratory, Nanostructures and biomaterials Area, National School of Higher Studies (ENES) Leon, National Autonomous University of Mexico (UNAM), Leon, Mexico.
  • Department of Prosthodontics, Semmelweis University Faculty of Dentistry, Budapest, Hungary.
  • Department of Prosthodontics, Tufts University School of Dental Medicine, Boston, Massachusetts, USA.

ORCID-Profile: Carlos A Jurado, Silvia Rojas-Rueda, Rene Garcia-Contreras, Damian J Lee

Zitieren

APA

Abuhammoud, S., Jurado, C. A., Rojas-Rueda, S., Garcia-Contreras, R., Vegh, D., & Lee, D. J. (2026). Impact of endodontic access design on the fracture resistance of zirconia mandibular molar crowns. Journal of Prosthodontics. https://doi.org/10.1111/jopr.70047

Vancouver

Abuhammoud S, Jurado CA, Rojas-Rueda S, Garcia-Contreras R, Vegh D, Lee DJ. Impact of endodontic access design on the fracture resistance of zirconia mandibular molar crowns. Journal of Prosthodontics. 2026. doi:10.1111/jopr.70047

BibTeX
@article{Abuhammoud2026,
  author = {Abuhammoud, Salahaldeen and Jurado, Carlos A and Rojas-Rueda, Silvia and Garcia-Contreras, Rene and Vegh, Daniel and Lee, Damian J},
  title = {Impact of endodontic access design on the fracture resistance of zirconia mandibular molar crowns},
  journal = {Journal of Prosthodontics},
  year = {2026},
  doi = {10.1111/jopr.70047}
}
Kostenlos starten →