EUVIMEDEUVIMED entdecken
Vergleichsstudie

Vertical marginal gap and internal fit of virgilite‐based lithium disilicate glass ceramic veneers with different preparation designs

Amr Rizk iD, Ahmed Abdou iD, Amira Mohammad Samy, Nouran Mahmoud, Sarah Omar

Journal of Prosthodontics · 2026

DOI: 10.1111/jopr.13937 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift Journal of Prosthodontics, 2026. Verfasst von Amr Rizk und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthetic Dentistry, Faculty of Dentistry, King Salman International University, South Sinai, Egypt. Hauptthemen laut MEDLINE: Dental Porcelain, Ceramics, Dental Marginal Adaptation, Dental Veneers. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 54 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

To evaluate and compare internal fit and marginal adaptation of conventional lithium disilicate (LDS) glass ceramics and LDS containing virgilite computer‐aided design and manufacturing (CAD‐CAM) blocks before and after aging. Materials and Methods Seventy‐two epoxy replicated dies from two prepared maxillary right central incisors acrylic typodont were divided into two groups of different preparation designs ( n = 36): Group I, incisal butt‐joint, and Group P, incisal overlap. Each group was further subdivided into two equal groups according to ceramic material ( n = 18): Group E, IPS e.max CAD, and Group T, Tessera advanced lithium disilicate (ALD) CAD‐CAM blocks. The replica technique was used to assess the internal fit using a stereomicroscope at 45× magnification. Laminate veneers were cemented to their corresponding epoxy dies, then the vertical marginal gap was evaluated before and after thermal cycling. Repeated measures analysis of variance (ANOVA) were used for marginal fit data and 2‐way ANOVA for internal fit measurements ( α = 0.05).

Results

For internal fit, there were no significant differences between tested groups. For vertical marginal gap results, two‐way ANOVA showed that only aging had a significant effect on the vertical marginal gap ( p < 0.001), while different CAD‐CAM materials and preparation designs did not affect the vertical marginal gap.

Conclusions

The vertical marginal gap and internal fits of IPS e.max CAD and CEREC Tessera CAD for both preparation designs were comparable. Aging significantly affected the vertical marginal gap of the laminate veneers of both materials and both preparation designs; however, all were within clinically acceptable ranges before and after aging.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Dental PorcelainCeramicsDental Marginal AdaptationDental VeneersDental Prosthesis DesignComputer-Aided DesignHumansMaterials TestingSilicates

Stichwörter der Autor:innen

glass ceramicinternal adaptationlaminate veneersmarginal adaptationpreparation designsthermal cycling

Substanzen

Dental Porcelainlithia disilicateGlass ceramicsSilicates

Autor:innen und Institutionen

  • Department of Prosthetic Dentistry, Faculty of Dentistry, King Salman International University, South Sinai, Egypt.
  • Department of Restorative Dentistry, Faculty of Dentistry, Universiti Malaya, Kuala Lumpur, Malaysia.
  • Department of Conservative Dentistry, Faculty of Oral and Dental Medicine, Badr University in Cairo, Cairo, Egypt.
  • Department of Prosthodontics, Faculty of Oral and Dental Medicine, Badr University in Cairo, Cairo, Egypt.

ORCID-Profile: Amr Rizk, Ahmed Abdou

Zitieren

APA

Rizk, A., Abdou, A., Samy, A. M., Mahmoud, N., & Omar, S. (2026). Vertical marginal gap and internal fit of virgilite‐based lithium disilicate glass ceramic veneers with different preparation designs. Journal of Prosthodontics. https://doi.org/10.1111/jopr.13937

Vancouver

Rizk A, Abdou A, Samy AM, Mahmoud N, Omar S. Vertical marginal gap and internal fit of virgilite‐based lithium disilicate glass ceramic veneers with different preparation designs. Journal of Prosthodontics. 2026. doi:10.1111/jopr.13937

BibTeX
@article{Rizk2026,
  author = {Rizk, Amr and Abdou, Ahmed and Samy, Amira Mohammad and Mahmoud, Nouran and Omar, Sarah},
  title = {Vertical marginal gap and internal fit of virgilite‐based lithium disilicate glass ceramic veneers with different preparation designs},
  journal = {Journal of Prosthodontics},
  year = {2026},
  doi = {10.1111/jopr.13937}
}
Kostenlos starten →