EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Translucency parameter and color masking ability of CAD‐CAM denture base materials against metal substrates

Yun-Ju Wang, Tien-Min G Chu iD, Wei-Shao Lin iD

Journal of Prosthodontics · 2023-04 · 32 (S1) · 61-67

DOI: 10.1111/jopr.13581 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Prosthodontics, online erschienen am 17.08.2022. Verfasst von Yun-Ju Wang und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontic Dentistry, Hsinchu Cathay General Hospital, Hsinchu City, Taiwan. Hauptthemen laut MEDLINE: Polymethyl Methacrylate, Denture Bases. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

To investigate the translucency parameters of traditional, milled, and 3D‐printed denture base materials at 3 different thicknesses and the color masking ability of each material against a metallic background between different thicknesses. Material and methods A traditional heat‐polymerizing polymethylmethacrylate (PMMA) (H‐Lucitone) material was used as the control group. Two milled pre‐polymerized resin blocks (M‐Lucitone and IvoBase) and five 3D‐printed denture base materials (P‐Lucitone, Dentca LP, Dentca OP, Formlabs, and Kulzer) were used as experimental groups. A total of 240 samples, (n = 30, per material) were fabricated to a final specimen dimension of 12×12 mm and in thicknesses of 1.0, 2.0, and 3.0 mm (n = 10 per thickness/material) according to the manufacturers’ recommendations. The color coordinates (L*, a*, b*) in CIELab color space for all specimens placed against a white, black, and metallic background were measured with a spectrophotometer. The translucency parameters (TP 00 ) at each thickness and the color differences between 1 mm and 2 mm (dE 00M1‐2 ) and between 2 mm and 3 mm (dE 00M2‐3 ) against the metallic background were calculated with the CIEDE2000 color matrix. Comparisons between the groups for differences in TP 00 were made using One‐way ANOVA separately for each thickness. Comparisons of groups and materials for differences in dE 00M1‐2 and dE 00M2‐3 were made using Two‐way ANOVA and Fisher's Protected Least Significant Differences (α = 0.05).

Results

The TP 00 decreased with increasing thickness in all 8 material groups. All 3D‐printed materials, except P‐Lucitone, had higher TP 00 than milled pre‐polymerized resin materials (M‐Lucitone and IvoBase), and traditional heat‐polymerizing PMMA (H‐Lucitone) material ( P

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Polymethyl MethacrylateDenture BasesAcrylic ResinsComputer-Aided DesignPrinting, Three-DimensionalMaterials TestingSurface PropertiesColor

Stichwörter der Autor:innen

3D-printingheat-polymerizingmillingoptical propertiesremovable dental prostheses

Substanzen

Polymethyl MethacrylateAcrylic Resins

Autor:innen und Institutionen

  • Department of Prosthodontic Dentistry, Hsinchu Cathay General Hospital, Hsinchu City, Taiwan.
  • Department of Biomedical Sciences and Comprehensive Care, Indiana University School of Dentistry, Indianapolis, IN.
  • Department of Prosthodontics, Indiana University School of Dentistry, Indianapolis, IN.

ORCID-Profile: Tien-Min G Chu, Wei-Shao Lin

Zitieren

APA

Wang, Y. J., Chu, T. G., & Lin, W. S. (2023). Translucency parameter and color masking ability of CAD‐CAM denture base materials against metal substrates. Journal of Prosthodontics, 32(S1), 61-67. https://doi.org/10.1111/jopr.13581

Vancouver

Wang YJ, Chu TG, Lin WS. Translucency parameter and color masking ability of CAD‐CAM denture base materials against metal substrates. Journal of Prosthodontics. 2023;32(S1):61-67. doi:10.1111/jopr.13581

BibTeX
@article{Wang2023,
  author = {Wang, Yun-Ju and Chu, Tien-Min G and Lin, Wei-Shao},
  title = {Translucency parameter and color masking ability of CAD‐CAM denture base materials against metal substrates},
  journal = {Journal of Prosthodontics},
  year = {2023},
  volume = {32},
  number = {S1},
  pages = {61--67},
  doi = {10.1111/jopr.13581}
}
Kostenlos starten →