EUVIMEDScopri EUVIMED
Open access · CC BY 4.0

Effect of Successive Bleaching Treatments Followed by Staining on Color, Whiteness, and Translucency of Polymer‐Based CAD ‐ CAM Materials

Alejandro Cardenas Ramos, Bruno Arruda Mascaro iD, José Maurício Dos Santos Nunes Reis iD, Lívia Nordi Dovigo, María M Pérez iD, Renata Garcia Fonseca iD

Journal of Esthetic and Restorative Dentistry · 2026-09 · 38 (9) · 1793-1801

DOI: 10.1111/jerd.70168 ↗

At a glance

Journal article in Journal of Esthetic and Restorative Dentistry, published online on 2026-04-26. Written by Alejandro Cardenas Ramos and 5 co-authors. Institution: Department of Dental Materials and Prosthodontics, School of Dentistry, São Paulo State University (UNESP), Araraquara, São Paulo, Brazil. Major MEDLINE topics: Computer-Aided Design, Tooth Bleaching, Polymers. 34 references. The full text is freely available (open access, CC BY 4.0). Funded by: Fundação de Amparo à Pesquisa do Estado de São Paulo.

AbstractSubjectsDati bibliograficiCiteRelated studies

Abstract (original language)

Objective

To evaluate differences in color, whiteness, and translucency of CAD‐CAM materials after successive bleaching treatments and coffee immersion. Materials and Methods Lava Ultimate (LU) and VITA Enamic (VE) were divided into four groups ( n = 12): untreated (control), 35% hydrogen peroxide (WH), 10% carbamide peroxide (OP), or WH followed by OP (WHOP). Color measurements were taken at baseline ( T 0 ) and after three consecutive bleaching sessions, each followed by coffee exposure ( T 1 , T 2 , and T 3 ). Differences in color (Δ E 00 ), whiteness (ΔWI D ), and translucency (ΔRTP 00 ) were statistically analyzed for each material using two‐way ANOVA and Bonferroni's tests and interpreted based on their respective perceptibility and acceptability thresholds. Surface topography was assessed by scanning electron microscopy.

Results

For LU, there were no differences in Δ E 00 and ΔWI D among bleaching treatments. The second and third sessions increased Δ E 00 and ΔWI D values. The WH showed the greatest imperceptible ΔRTP 00 . In VE, no treatment increased Δ E 00 , and only OP showed higher ΔE 00 in T 3 – T 0 compared with T 1 – T 0 , but it was still imperceptible. All treatments decreased ΔWI D in T 2 – T 0 and T 3 – T 0 , with no significant differences in ΔRTP 00 compared with control. Except for WHOP, there were no statistical differences among sessions for ΔRTP 00 . Only WH in VE did not result in topographic changes.

Conclusions

Successive bleaching treatments and coffee immersion resulted in imperceptible or deemed acceptable color, whiteness, and translucency changes of LU and VE. Clinical Significance Despite the surface topographic changes, all the bleaching methods tested in up to three sessions each followed by exposure to coffee did not adversely affect the esthetic durability of Lava Ultimate and VITA Enamic CAD‐CAM materials.

Subjects

MeSH terms (MEDLINE)

Computer-Aided DesignTooth BleachingPolymersColorCarbamide PeroxideCoffeePeroxidesUreaHydrogen PeroxideTooth Bleaching AgentsSurface PropertiesMethacrylatesSilicates

Author keywords

CAD/CAM materialsbleachingcolortranslucencywhiteness

Substances

Carbamide PeroxideCoffeePeroxidesUreaHydrogen PeroxideTooth Bleaching AgentsVITA EnamicPolymersMethacrylatesSilicates

Authors and institutions

  • Department of Dental Materials and Prosthodontics, School of Dentistry, São Paulo State University (UNESP), Araraquara, São Paulo, Brazil.
  • Department of Social Dentistry, School of Dentistry, São Paulo State University (UNESP), Araraquara, São Paulo, Brazil.
  • Department of Optics, Faculty of Science, University of Granada, Granada, Spain.

ORCID profiles: Bruno Arruda Mascaro, José Maurício Dos Santos Nunes Reis, María M Pérez, Renata Garcia Fonseca

Funding

  • Fundação de Amparo à Pesquisa do Estado de São Paulo

Cite

APA

Ramos, A. C., Mascaro, B. A., Dos Santos Nunes Reis, J. M., Dovigo, L. N., Pérez, M. M., & Fonseca, R. G. (2026). Effect of Successive Bleaching Treatments Followed by Staining on Color, Whiteness, and Translucency of Polymer‐Based CAD ‐ CAM Materials. Journal of Esthetic and Restorative Dentistry, 38(9), 1793-1801. https://doi.org/10.1111/jerd.70168

Vancouver

Ramos AC, Mascaro BA, Dos Santos Nunes Reis JM, Dovigo LN, Pérez MM, Fonseca RG. Effect of Successive Bleaching Treatments Followed by Staining on Color, Whiteness, and Translucency of Polymer‐Based CAD ‐ CAM Materials. Journal of Esthetic and Restorative Dentistry. 2026;38(9):1793-1801. doi:10.1111/jerd.70168

BibTeX
@article{Ramos2026,
  author = {Ramos, Alejandro Cardenas and Mascaro, Bruno Arruda and Dos Santos Nunes Reis, José Maurício and Dovigo, Lívia Nordi and Pérez, María M and Fonseca, Renata Garcia},
  title = {Effect of Successive Bleaching Treatments Followed by Staining on Color, Whiteness, and Translucency of Polymer‐Based CAD ‐ CAM Materials},
  journal = {Journal of Esthetic and Restorative Dentistry},
  year = {2026},
  volume = {38},
  number = {9},
  pages = {1793--1801},
  doi = {10.1111/jerd.70168}
}
Start for free →