EUVIMEDSkopri EUVIMED
Open access

Color and Translucency Stability of Additively Manufactured Interim Dental Restorative Materials: An In Vitro Aging Simulation Study

Fadi Bitar, Tariq Alsahafi iD, Jean-Pierre Albouy, Adalberto Vasconcellos iD, Taiseer A Sulaiman iD

Journal of Esthetic and Restorative Dentistry · 2026-09 · 38 (9) · 1766-1772

DOI: 10.1111/jerd.70137 ↗

At a glance

Journal article in Journal of Esthetic and Restorative Dentistry, published online on 2026-03-07. Written by Fadi Bitar and 4 co-authors. Institution: Department of Restorative Sciences, University of North Carolina, Adams School of Dentistry, Chapel Hill, North Carolina, USA. Major MEDLINE topics: Dental Materials. 20 references. The full text is freely available in PubMed Central.

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Statement of Problem Additively manufactured interim restorative materials are being employed to meet contemporary esthetic demands, yet the longevity of their optical characteristics remains uncertain.

Objective

To assess the impact of material composition and manufacturing method on the optical stability of different additively manufactured interim restorative resins under in vitro aging methods and compare these properties to those of milled hybrid ceramic blocks. Materials and Methods A total of 240 disc‐shaped specimens (diameter 10.00 ± 0.05 mm, thickness 1.10 ± 0.05 mm) were fabricated utilizing four additively manufactured resin‐based and two milled hybrid ceramic blocks. Following standardized finishing and polishing processes, the specimens were aged in coffee at 55°C, grape juice at 5°C, deionized water at 25°C, or thermocycled between 5°C and 55°C. Color stability ( ΔE 00 ) and relative translucency parameter ( RTP 00 ) were evaluated. Data was analyzed with two‐way ANOVA and Tukey's post‐hoc tests ( α = 0.05).

Results

Material type significantly affected the color and translucency following aging ( p < 0.001). Among additively manufactured materials, Primeprint Temp demonstrated the least color change (ΔE 00 = 4.30 ± 1.10), while Ceramic Crown Resin showed the most significant discoloration (ΔE 00 = 13.52 ± 1.40). Furthermore, the milled hybrid ceramic material (Enamic) exhibited the lowest overall color change across all tested materials. Ceramic Crown Resin exhibited the most significant reduction in the relative translucency parameter (ΔRTP 00 = −2.70 ± 0.55), exceeding the acceptability threshold of 2.6 following immersion in coffee.

Conclusions

Primeprint Temp demonstrated superior color and translucency stability relative to the other materials examined, whereas Ceramic Crown Resin showed the least stability, particularly under the conditions of coffee immersion. Clinical Significance Understanding the optical stability of contemporary interim additively manufactured resins facilitates enhanced esthetic stability between sessions and minimizes the necessity for repolishing or remaking interim restorations. Patients who frequently consume hot, staining beverages should be warned about potential discoloration, especially when utilizing resin‐based materials for long‐term use.

Subjects

MeSH terms (MEDLINE)

Dental MaterialsColorMaterials TestingIn Vitro TechniquesCeramicsCoffeeComposite ResinsTime Factors

Author keywords

3D‐printed materialscolor stabilityresin‐based materialsrestorative dentistrytranslucency

Substances

Dental MaterialsCoffeeComposite Resins

Authors and institutions

  • Department of Restorative Sciences, University of North Carolina, Adams School of Dentistry, Chapel Hill, North Carolina, USA.
  • Department of Conservative Dentistry, College of Dentistry, Qassim University, Qassim, Saudi Arabia.

ORCID profiles: Tariq Alsahafi, Adalberto Vasconcellos, Taiseer A Sulaiman

Cite

APA

Bitar, F., Alsahafi, T., Albouy, J. P., Vasconcellos, A., & Sulaiman, T. A. (2026). Color and Translucency Stability of Additively Manufactured Interim Dental Restorative Materials: An In Vitro Aging Simulation Study. Journal of Esthetic and Restorative Dentistry, 38(9), 1766-1772. https://doi.org/10.1111/jerd.70137

Vancouver

Bitar F, Alsahafi T, Albouy JP, Vasconcellos A, Sulaiman TA. Color and Translucency Stability of Additively Manufactured Interim Dental Restorative Materials: An In Vitro Aging Simulation Study. Journal of Esthetic and Restorative Dentistry. 2026;38(9):1766-1772. doi:10.1111/jerd.70137

BibTeX
@article{Bitar2026,
  author = {Bitar, Fadi and Alsahafi, Tariq and Albouy, Jean-Pierre and Vasconcellos, Adalberto and Sulaiman, Taiseer A},
  title = {Color and Translucency Stability of Additively Manufactured Interim Dental Restorative Materials: An In Vitro Aging Simulation Study},
  journal = {Journal of Esthetic and Restorative Dentistry},
  year = {2026},
  volume = {38},
  number = {9},
  pages = {1766--1772},
  doi = {10.1111/jerd.70137}
}
Start for free →