EUVIMEDObjevte EUVIMED
Open access · CC BY-NC-ND 4.0

Masking capacity of minimally invasive lithium disilicate restorations on discolored teeth—The impact of ceramic thickness, the material's translucency, and the cement color

Kevser Pala, Eva Maria Reinshagen, Thomas Attin, Jürg Hüsler, Ronald E Jung, Alexis Ioannidis iD

Journal of Esthetic and Restorative Dentistry · 2024-01 · 36 (1) · 107-115

DOI: 10.1111/jerd.13146 ↗

At a glance

Journal article in Journal of Esthetic and Restorative Dentistry, published online on 2023-11-07. Written by Kevser Pala and 5 co-authors. Institution: Clinic of Reconstructive Dentistry, Center of Dental Medicine, University of Zurich, Zurich, Switzerland. Major MEDLINE topics: Dental Porcelain, Ceramics. Cited 15 times so far (Crossref); 28 references. The full text is freely available (open access, CC BY-NC-ND 4.0).

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

Objectives

To evaluate minimally invasive restorations' capacity to mask discolored teeth and explore the impact of ceramic thickness, translucency, and cement color. Materials and Methods Twenty‐four assessment pairs of naturally colored and discolored bovine dentin samples were formed, using lithium disilicate specimens in six different thicknesses (0.3–0.8 mm), two different translucencies (high, low), and two cements (transparent, tooth‐colored). Evaluators assessed the color differences in each assessment pair, and the threshold for detecting a color difference was determined using sequential testing and the Bonferroni‐Holm method.

Results

A thickness of 0.6 mm effectively masked color differences using high translucent ceramic with transparent cement, detectable differences were still observed at 0.7/0.8 mm. A threshold thickness of 0.4 mm was seen using high translucent ceramic and tooth‐colored cement, with color differences still discernible at 0.5 and 0.8 mm. A threshold thickness of 0.4 mm was detected using low translucent ceramic and transparent cement, while detectable differences persisted at 0.5, 0.7, and 0.8 mm. A 0.5 mm threshold thickness was observed when using low translucent ceramic and tooth‐colored cement, and no detectable color differences were detected beyond this thickness.

Conclusions

Masking can be achieved with a thickness of 0.4–0.5 mm using a low translucent material and tooth‐colored cement. Clinical Significance Understanding the impact of ceramic thickness, translucency, and cement color can aid clinicians in making informed decisions for achieving the best esthetic outcomes while preserving tooth structure. Effective masking can be accomplished with ceramic thicknesses starting at 0.4 mm, especially when employing a low translucent material and tooth‐colored cement. However, clinicians should be aware that discolorations may still be detectable in certain scenarios when using minimally invasive lithium disilicate restorations.

Subjects

MeSH terms (MEDLINE)

Dental PorcelainCeramicsAnimalsCattleDental CementsGlass Ionomer CementsMaterials TestingColorSurface Properties

Author keywords

cement colorceramic thicknessceramic translucencydiscolorationlithium disilicatemasking capacityminimally invasive

Substances

lithia disilicateDental PorcelainDental CementsGlass Ionomer Cements

Authors and institutions

  • Clinic of Reconstructive Dentistry, Center of Dental Medicine, University of Zurich, Zurich, Switzerland.
  • Doctoral Student at the Clinic of Reconstructive Dentistry, Center of Dental Medicine, University of Zurich, Zurich, Switzerland.
  • Clinic of Conservative and Preventive Dentistry, Center of Dental Medicine, University of Zurich, Zurich, Switzerland.
  • Department of Mathematical Statistics, University of Bern, Bern, Switzerland.

ORCID profiles: Alexis Ioannidis

Cite

APA

Pala, K., Reinshagen, E. M., Attin, T., Hüsler, J., Jung, R. E., & Ioannidis, A. (2024). Masking capacity of minimally invasive lithium disilicate restorations on discolored teeth—The impact of ceramic thickness, the material's translucency, and the cement color. Journal of Esthetic and Restorative Dentistry, 36(1), 107-115. https://doi.org/10.1111/jerd.13146

Vancouver

Pala K, Reinshagen EM, Attin T, Hüsler J, Jung RE, Ioannidis A. Masking capacity of minimally invasive lithium disilicate restorations on discolored teeth—The impact of ceramic thickness, the material's translucency, and the cement color. Journal of Esthetic and Restorative Dentistry. 2024;36(1):107-115. doi:10.1111/jerd.13146

BibTeX
@article{Pala2024,
  author = {Pala, Kevser and Reinshagen, Eva Maria and Attin, Thomas and Hüsler, Jürg and Jung, Ronald E and Ioannidis, Alexis},
  title = {Masking capacity of minimally invasive lithium disilicate restorations on discolored teeth—The impact of ceramic thickness, the material's translucency, and the cement color},
  journal = {Journal of Esthetic and Restorative Dentistry},
  year = {2024},
  volume = {36},
  number = {1},
  pages = {107--115},
  doi = {10.1111/jerd.13146}
}
Start for free →