EUVIMEDDescoperă EUVIMED
Crossref

Effect of Donor and Acceptor Doping on Piezoelectric Properties of BNT‐6BT Ceramics

Jianyi Zhang, Wei Liu, Shengjun Liu, Hongjie Duan, Jianhui Li, Vladimir Koval

Journal of the American Ceramic Society · 2026-11 · 109 (11)

DOI: 10.1111/jace.71432 ↗

At a glance

Journal article in Journal of the American Ceramic Society, published online on 2026-11-15. Written by Jianyi Zhang and 5 co-authors. 34 references. Funded by: Slovenská Akadémia Vied, Agentúra na Podporu Výskumu a Vývoja.

RezumatDate bibliograficeCiteRelated studies

Abstract (original language)

Donor and acceptor doping are the most widely used strategies to optimize piezoelectric properties of Pb(Zr,Ti)O 3 (PZT) ceramics. Due to restrictions on the use of toxic lead and other hazardous substances in electrical and electronic products, there is a high interest in developing lead‐free ceramics for sustainable piezoelectric applications. Bi 0.5 Na 0.5 TiO 3% –6%BaTiO 3 (BNT‐6BT) is one of the promising candidates in a class of Pb‐free ferroelectrics to replace conventional PZT in piezoelectric actuators, sensors and transducers. This work systematically investigates the effects of donor and acceptor doping on the structure, dielectric, ferroelectric, and piezoelectric properties of BNT‐6BT ceramics. The electron donor doping with Sr 2 + and Ca 2 + ions entering Na + sites and acceptor doping with Sr 2 + and Ca 2 + ions substituting Bi 3 + ions at A‐sites were employed to tailor defect chemistry and domain behavior. XRD analysis revealed a coexistence of rhombohedral (a space group, SG: R 3 c ) and tetragonal (SG: P 4 bm ) phases in both donor‐ and acceptor‐doped compositions. Comparing with the undoped and acceptor‐doped ceramics, the BNT‐6BT samples with donor dopants have higher dielectric permittivity ( ε r ∼940–982) and piezoelectric d 33 coefficient (∼119–138 pC/N) due to the reduced pinning effect of oxygen vacancies on domain wall movement. The enhanced domain wall pinning in the acceptor‐doped ceramics was found to bring about a higher mechanical quality factor ( Q m ∼51.3–74.5). The depoling temperature ( T d ) of BNT‐6BT shifts to lower temperatures on donor doping, whereas the acceptor dopants smear the permittivity peak around T d . The obtained results demonstrate that defect engineering is an effective strategy to tune the piezoelectric properties of BNT‐based ceramics and prepare eco‐friendly counterparts of widely used soft and hard PZT piezoceramics.

Funding

  • Slovenská Akadémia Vied
  • Agentúra na Podporu Výskumu a Vývoja

Cite

APA

Zhang, J., Liu, W., Liu, S., Duan, H., Li, J., & Koval, V. (2026). Effect of Donor and Acceptor Doping on Piezoelectric Properties of BNT‐6BT Ceramics. Journal of the American Ceramic Society, 109(11). https://doi.org/10.1111/jace.71432

Vancouver

Zhang J, Liu W, Liu S, Duan H, Li J, Koval V. Effect of Donor and Acceptor Doping on Piezoelectric Properties of BNT‐6BT Ceramics. Journal of the American Ceramic Society. 2026;109(11). doi:10.1111/jace.71432

BibTeX
@article{Zhang2026,
  author = {Zhang, Jianyi and Liu, Wei and Liu, Shengjun and Duan, Hongjie and Li, Jianhui and Koval, Vladimir},
  title = {Effect of Donor and Acceptor Doping on Piezoelectric Properties of BNT‐6BT Ceramics},
  journal = {Journal of the American Ceramic Society},
  year = {2026},
  volume = {109},
  number = {11},
  doi = {10.1111/jace.71432}
}
Start for free →