EUVIMEDOpdag EUVIMED
Crossref

Tailoring ZTA Ceramics With Ti 3 AlC 2 Reinforcement: Microstructure, Mechanical Properties and Scratch Resistance

Chandra Obulesu Bapanapalle, Ruchika Dhyani, Nitin Mahato, Soumyadip De, Nilrudra Mandal

Journal of the American Ceramic Society · 2026-11 · 109 (11)

DOI: 10.1111/jace.71410 ↗

At a glance

Journal article in Journal of the American Ceramic Society, published online on 2026-11-10. Written by Chandra Obulesu Bapanapalle and 4 co-authors. 35 references. Funded by: Anusandhan National Research Foundation, Council of Scientific and Industrial Research, India.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Zirconia‐toughened alumina (ZTA) ceramics reinforced with Ti 3 AlC 2 MAX phase are successfully fabricated through pressureless sintering to investigate the influence of Ti 3 AlC 2 addition on the microstructural, physico‐mechanical properties and scratch resistance behavior of the composites. Ti 3 AlC 2 content varies from 0 to 5 wt.%, and the green compacts are prepared by uniaxial pressing at 200 MPa followed by sintering at 1350°C under an argon atmosphere. XRD analysis confirms the successful retention of Ti 3 AlC 2 within the ZTA matrix without the formation of secondary phases. The monolithic ZTA exhibits a density and relative density of 4.12 g/cm 3 and 96.17%, respectively, which increases to a maximum of 4.14 g/cm 3 and 96.68% at 2 wt.% Ti 3 AlC 2 addition. FESEM analysis reveals significant grain refinement at lower reinforcement contents. The microhardness increases from 1736 HV for monolithic ZTA to 1938 HV at 2 wt.% Ti 3 AlC 2 , while fracture toughness improves from 4.45 to 5.54 MPa.m 0.5 due to crack deflection, crack bridging and crack branching mechanisms induced by the layered Ti 3 AlC 2 structure. Furthermore, the 2 wt.% Ti 3 AlC 2 composite exhibits superior scratch resistance with the minimum scratch depth among all compositions.

Funding

  • Anusandhan National Research Foundation
  • Council of Scientific and Industrial Research, India

Cite

APA

Bapanapalle, C. O., Dhyani, R., Mahato, N., De, S., & Mandal, N. (2026). Tailoring ZTA Ceramics With Ti 3 AlC 2 Reinforcement: Microstructure, Mechanical Properties and Scratch Resistance. Journal of the American Ceramic Society, 109(11). https://doi.org/10.1111/jace.71410

Vancouver

Bapanapalle CO, Dhyani R, Mahato N, De S, Mandal N. Tailoring ZTA Ceramics With Ti 3 AlC 2 Reinforcement: Microstructure, Mechanical Properties and Scratch Resistance. Journal of the American Ceramic Society. 2026;109(11). doi:10.1111/jace.71410

BibTeX
@article{Bapanapalle2026,
  author = {Bapanapalle, Chandra Obulesu and Dhyani, Ruchika and Mahato, Nitin and De, Soumyadip and Mandal, Nilrudra},
  title = {Tailoring ZTA Ceramics With Ti 3 AlC 2 Reinforcement: Microstructure, Mechanical Properties and Scratch Resistance},
  journal = {Journal of the American Ceramic Society},
  year = {2026},
  volume = {109},
  number = {11},
  doi = {10.1111/jace.71410}
}
Start for free →