EUVIMEDEUVIMED entdecken
Crossref

Slurry Carbon–Driven Pore Evolution, Infiltration, and Mechanical Properties of Continuous Carbon Fiber‐Reinforced Silicon Carbide Composites Prepared by Slurry Impregnation Combined With Reaction Melt Infiltration

Jianzhao Shang, Jiahe Zeng, Yongsheng Liu, Mengzhu Liu, Yansong Liu, Shaolin Fu, Jingxin Li, Yu Pan, Le Zhang, Yuan Yao

Journal of the American Ceramic Society · 2026-11 · 109 (11)

DOI: 10.1111/jace.71394 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 08.11.2026. Verfasst von Jianzhao Shang und 9 weiteren Autor:innen. Die Arbeit nennt 62 Literaturangaben. Gefördert von: National Defense Basic Scientific Research Program of China, National Natural Science Foundation of China, Natural Science Foundation of Zhejiang Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Continuous carbon fiber‐reinforced silicon carbide (C f /SiC) composites are widely used in aerospace and other high‐temperature applications. However, conventional PyC/ReC system contain excessive residual Si and macroscopic silicon pools within the composites fabricated by reactive melt infiltration. Herein, C f /SiC composites were fabricated by slurry impregnation and reactive melt infiltration, and the effects of slurry composition on impregnation behavior, pore structure evolution, reaction–infiltration coupling, microstructure, and mechanical properties were investigated. Increasing the slurry carbon content refined the pore structure, reducing the average pore size from 2288.5 to 769.8 µm. The optimized pore structure and increased reactive carbon content enhanced the capillary force–driven reaction–infiltration coupling, increasing in situ SiC formation (14.4–30.0 vol.%) and reducing porosity (16.0%–8.1%). Enhanced matrix continuity strengthened interfacial constraint and altered fracture behavior. Although the RMI–S0C1 achieved the highest flexural strength (349.3 MPa), excessive interfacial constraints reduced toughness. No macroscopic silicon pools were observed, and the residual Si content was only 1.1 vol.%.

Förderung

  • National Defense Basic Scientific Research Program of China
  • National Natural Science Foundation of China
  • Natural Science Foundation of Zhejiang Province

Zitieren

APA

Shang, J., Zeng, J., Liu, Y., Liu, M., Liu, Y., Fu, S., Li, J., Pan, Y., Zhang, L., & Yao, Y. (2026). Slurry Carbon–Driven Pore Evolution, Infiltration, and Mechanical Properties of Continuous Carbon Fiber‐Reinforced Silicon Carbide Composites Prepared by Slurry Impregnation Combined With Reaction Melt Infiltration. Journal of the American Ceramic Society, 109(11). https://doi.org/10.1111/jace.71394

Vancouver

Shang J, Zeng J, Liu Y, Liu M, Liu Y, Fu S, et al. Slurry Carbon–Driven Pore Evolution, Infiltration, and Mechanical Properties of Continuous Carbon Fiber‐Reinforced Silicon Carbide Composites Prepared by Slurry Impregnation Combined With Reaction Melt Infiltration. Journal of the American Ceramic Society. 2026;109(11). doi:10.1111/jace.71394

BibTeX
@article{Shang2026,
  author = {Shang, Jianzhao and Zeng, Jiahe and Liu, Yongsheng and Liu, Mengzhu and Liu, Yansong and Fu, Shaolin and Li, Jingxin and Pan, Yu and Zhang, Le and Yao, Yuan},
  title = {Slurry Carbon–Driven Pore Evolution, Infiltration, and Mechanical Properties of Continuous Carbon Fiber‐Reinforced Silicon Carbide Composites Prepared by Slurry Impregnation Combined With Reaction Melt Infiltration},
  journal = {Journal of the American Ceramic Society},
  year = {2026},
  volume = {109},
  number = {11},
  doi = {10.1111/jace.71394}
}
Kostenlos starten →