EUVIMEDEUVIMED entdecken
Crossref

Effect of Boron Source on Microstructure and Mechanical Properties of SiBCN Ceramics

Peng Qi, Donghua Xu, Litao Yin, Hanzhao Tian, Yan Wang, Qian Zhang, Zibo Niu, Daxin Li, Dechang Jia

Journal of the American Ceramic Society · 2026-11 · 109 (11)

DOI: 10.1111/jace.71333 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 17.11.2026. Verfasst von Peng Qi und 8 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mechanically alloyed amorphous SiBCN powders with two different boron sources ( h ‐BN and elemental B) were hot‐pressed at 1800°C, 1900°C, and 2000°C under a pressure of 50 MPa in nitrogen atmosphere for 30 min. The phase transformation, microstructural evolution, and mechanical properties of the prepared ceramics were systematically investigated by XRD, TEM, SEM, and mechanical testing. Results show that the precipitation of β‐Si 3 N 4 , β‐SiC, and BN(C) in the amorphous matrix strongly depends on the reactivity of boron precursors. The SiBCN‐1 derived from h ‐BN precursor forms β‐Si 3 N 4 , β‐SiC, and lamellar BN(C), and achieves a maximum flexural strength of 60.2 MPa at 2000°C. SiBCN‐2 exhibits enhanced sintering activity, and its mechanical properties rapidly improve at 1900°C, with flexural strength and fracture toughness reaching 202.3 MPa and 6.34 MPa·m 1/2 , respectively. However, oversintering at 2000°C induces severe BN‐rich segregation and obvious degradation in mechanical performance.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Qi, P., Xu, D., Yin, L., Tian, H., Wang, Y., Zhang, Q., Niu, Z., Li, D., & Jia, D. (2026). Effect of Boron Source on Microstructure and Mechanical Properties of SiBCN Ceramics. Journal of the American Ceramic Society, 109(11). https://doi.org/10.1111/jace.71333

Vancouver

Qi P, Xu D, Yin L, Tian H, Wang Y, Zhang Q, et al. Effect of Boron Source on Microstructure and Mechanical Properties of SiBCN Ceramics. Journal of the American Ceramic Society. 2026;109(11). doi:10.1111/jace.71333

BibTeX
@article{Qi2026,
  author = {Qi, Peng and Xu, Donghua and Yin, Litao and Tian, Hanzhao and Wang, Yan and Zhang, Qian and Niu, Zibo and Li, Daxin and Jia, Dechang},
  title = {Effect of Boron Source on Microstructure and Mechanical Properties of SiBCN Ceramics},
  journal = {Journal of the American Ceramic Society},
  year = {2026},
  volume = {109},
  number = {11},
  doi = {10.1111/jace.71333}
}
Kostenlos starten →