EUVIMEDEUVIMED entdecken
Crossref

Effect of Layer Number on Microstructure and Mechanical Properties of TiC‐WC/TiC‐TiCN Laminated Ceramics

Jinpeng Song, Xuesong He, Jiaojiao Gao, Zhuo Wang, Kuang Sun, Xiong Niu, Wei Xu, Haibao Yue, Jian Zhao

Advanced Engineering Materials · 2025-11 · 27 (22)

DOI: 10.1002/adem.202501220 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 04.10.2025. Verfasst von Jinpeng Song und 8 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: NNSFC.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To improve fracture toughness (FT) and flexural strength (FS) of TiC‐based ceramics, TiC‐WC/TiC‐TiCN laminated ceramics (TWTTLCs) are fabricated by the layer‐making method and vacuum hot‐pressing sintering technology. The effects of layer numbers (LN) on residual stress, microstructure, and mechanical properties are investigated. The result shows that residual compressive stress (RCS) and residual tensile stress (RTS) layers are alternately distributed in TWTTLCs, and an increase in LN results in higher RCS and lower RTS. Small amounts of Ni and Mo are present in both the TiC‐WC layer (TWL) and the TiC‐TiCN layer (TTL). The main phases in TWL are TiC, (Ti, W)C, and (Ti, W, Mo)C, while in TTL are TiC, TiCN, and (Ti, Mo)C. The fracture of TWTTLCs is mainly characterized by intergranular and transgranular fractures. The number of microdefects in TWTTLCs is relatively small. As LN increases, Vickers hardness(VH), FT, and FS of TWTTLCs first increase and then decrease. When LN is 7, TWTTLC shows better comprehensive mechanical properties: the surface VH is 18.7 ± 0.1 GPa, the overall FT (OFT) is 8.74 ± 0.2 MPa m 1/2 , and FS is 1089.5 ± 10 MPa. This study demonstrates that the incorporation of a laminate structure in TiC‐based ceramic can effectively enhance its mechanical properties.

Förderung

  • NNSFC

Zitieren

APA

Song, J., He, X., Gao, J., Wang, Z., Sun, K., Niu, X., Xu, W., Yue, H., & Zhao, J. (2025). Effect of Layer Number on Microstructure and Mechanical Properties of TiC‐WC/TiC‐TiCN Laminated Ceramics. Advanced Engineering Materials, 27(22). https://doi.org/10.1002/adem.202501220

Vancouver

Song J, He X, Gao J, Wang Z, Sun K, Niu X, et al. Effect of Layer Number on Microstructure and Mechanical Properties of TiC‐WC/TiC‐TiCN Laminated Ceramics. Advanced Engineering Materials. 2025;27(22). doi:10.1002/adem.202501220

BibTeX
@article{Song2025,
  author = {Song, Jinpeng and He, Xuesong and Gao, Jiaojiao and Wang, Zhuo and Sun, Kuang and Niu, Xiong and Xu, Wei and Yue, Haibao and Zhao, Jian},
  title = {Effect of Layer Number on Microstructure and Mechanical Properties of TiC‐WC/TiC‐TiCN Laminated Ceramics},
  journal = {Advanced Engineering Materials},
  year = {2025},
  volume = {27},
  number = {22},
  doi = {10.1002/adem.202501220}
}
Kostenlos starten →