EUVIMEDEUVIMED entdecken
Crossref

A Two‐Step Carbothermal Reduction–Nitridation Route for Controllable Synthesis of High‐Quality Ti(C, N) Powders

Xiao‐Dong Kang, Guo‐Hua Zhang

Journal of the American Ceramic Society · 2026-10 · 109 (10)

DOI: 10.1111/jace.71306 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 13.10.2026. Verfasst von Xiao‐Dong Kang und 1 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Gefördert von: State Key Laboratory of Advanced Metallurgy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the issues of free carbon and non‐uniform C/N ratios in Ti(C, N) powders prepared via conventional one‐step carbothermal reduction–nitridation (CRN), this study proposed a two‐step CRN synthesis strategy. In the first step, low‐temperature pre‐reduction and pre‐nitridation were conducted at 1250°C under an N 2 atmosphere to form a nitrogen‐rich Ti(C, N, O) intermediate phase, followed with a homogenization treatment by uniform mixing to eliminate local differences in carbon potential within the powder bed. The second step involved deep deoxygenation and C/N ratio reconstruction at elevated temperatures ranging from 1400 to 1550°C under different N 2 partial pressures, enabling the controllable synthesis of Ti(C, N) powders. The optimal preparation conditions were determined for different initial C/TiO 2 molar ratios. The obtained Ti(C 0.02 , N 0.92 , O 0.06 ), Ti(C 0.07 , N 0.93 ), Ti(C 0.29 , N 0.71 ), and Ti(C 0.51 , N 0.49 ) powders exhibited ultralow free carbon, homogeneous morphology, high crystallinity, and excellent dispersibility. The powder grains mainly ranged from submicron to micron sizes with nearly spherical or irregular polyhedral morphologies. Furthermore, Ti(C 0.29 , N 0.71 ) and Ti(C 0.51 , N 0.49 ) had lower oxygen contents (0.28 and 0.50 wt%, respectively) and smaller average grain sizes (0.79 ± 0.27 and 0.91 ± 0.26 µm, respectively). This two‐step CRN method provides a promising route for the controllable synthesis and scalable application of high‐quality Ti(C, N) powders.

Förderung

  • State Key Laboratory of Advanced Metallurgy

Zitieren

APA

Kang, X., & Zhang, G. (2026). A Two‐Step Carbothermal Reduction–Nitridation Route for Controllable Synthesis of High‐Quality Ti(C, N) Powders. Journal of the American Ceramic Society, 109(10). https://doi.org/10.1111/jace.71306

Vancouver

Kang X, Zhang G. A Two‐Step Carbothermal Reduction–Nitridation Route for Controllable Synthesis of High‐Quality Ti(C, N) Powders. Journal of the American Ceramic Society. 2026;109(10). doi:10.1111/jace.71306

BibTeX
@article{Kang2026,
  author = {Kang, Xiao‐Dong and Zhang, Guo‐Hua},
  title = {A Two‐Step Carbothermal Reduction–Nitridation Route for Controllable Synthesis of High‐Quality Ti(C, N) Powders},
  journal = {Journal of the American Ceramic Society},
  year = {2026},
  volume = {109},
  number = {10},
  doi = {10.1111/jace.71306}
}
Kostenlos starten →