EUVIMEDEUVIMED entdecken
Crossref

Targeting for 1500°C Capable SiC f /SiC Composites: Insights From Two Types of Third‐Generation SiC Fibers

Jin Zhang, Yanfei Wang, Xiangjian Chen, Yanzi Gou, Duan Li, Rongjun Liu

Journal of the American Ceramic Society · 2026-07 · 109 (7)

DOI: 10.1111/jace.71030 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 20.07.2026. Verfasst von Jin Zhang und 5 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

SiC f /SiC composites were fabricated using two categories of third‐generation SiC fibers: S‐type (smaller grains, higher strength) and SA‐type (larger grains, lower strength), followed by 100‐h heat treatment at 1500°C in argon. The results indicate that the crystallization of amorphous SiC x O y phase in Cansas‐III fibers (S‐type) causes fiber volume shrinkage, leading to large‐area debonding between PyC and fibers. While the sublimation of Si in KD‐SA fibers (SA‐type) migrates into the PyC interfacial layer and reacts with PyC to form SiC, resulting in discontinuous SiC particle bands in the central region of PyC interfacial layer. KD‐SA SiC f /SiC composites exhibit higher initial IFSS due to a highly rough fiber surface. After 100 h of heat treatment, the IFSS of KD‐SA SiC f /SiC composites remains at a high level of approximately 150 MPa due to the enhanced friction caused by SiC particle bands. While the IFSS of Cansas‐III SiC f /SiC composites decreases from 64.17 to 51.73 MPa.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zhang, J., Wang, Y., Chen, X., Gou, Y., Li, D., & Liu, R. (2026). Targeting for 1500°C Capable SiC f /SiC Composites: Insights From Two Types of Third‐Generation SiC Fibers. Journal of the American Ceramic Society, 109(7). https://doi.org/10.1111/jace.71030

Vancouver

Zhang J, Wang Y, Chen X, Gou Y, Li D, Liu R. Targeting for 1500°C Capable SiC f /SiC Composites: Insights From Two Types of Third‐Generation SiC Fibers. Journal of the American Ceramic Society. 2026;109(7). doi:10.1111/jace.71030

BibTeX
@article{Zhang2026,
  author = {Zhang, Jin and Wang, Yanfei and Chen, Xiangjian and Gou, Yanzi and Li, Duan and Liu, Rongjun},
  title = {Targeting for 1500°C Capable SiC f /SiC Composites: Insights From Two Types of Third‐Generation SiC Fibers},
  journal = {Journal of the American Ceramic Society},
  year = {2026},
  volume = {109},
  number = {7},
  doi = {10.1111/jace.71030}
}
Kostenlos starten →