EUVIMEDEUVIMED entdecken
Crossref

Additive manufacturing of high mechanical strength continuous C f /SiC composites using a 3D extrusion technique and polycarbosilane‐coated carbon fibers

Ruoyu Chen, Adam Bratten, Joshua Rittenhouse, Ming Leu, Haiming Wen

Journal of the American Ceramic Society · 2023-07 · 106 (7) · 4028-4037

DOI: 10.1111/jace.19079 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 07.03.2023. Verfasst von Ruoyu Chen und 4 weiteren Autor:innen. Die Arbeit wurde bisher 34-mal zitiert (Crossref) und nennt 28 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A novel additive manufacturing approach is herein reported for manufacturing high mechanical strength continuous carbon fiber‐reinforced silicon carbide (C f /SiC) composite materials. Continuous carbon fibers were coated with polycarbosilane (PCS) using a colloidal evaporative deposition process and then coextruded with high solid content SiC ink. The zeta potential of the SiC ink was adjusted to optimize the printing ability of the suspension. During sintering, small SiC grains and whiskers were generated in the gaps in and around the PCS‐coated carbon fibers, which led to the improved flexural strength and density of the composites. Meanwhile, the PCS coating on the surface of the carbon fibers prevented the carbon fibers from reacting with SiO gas generated by reactions between the SiC matrix and SiO 2 and sintering additives (Al 2 O 3 and Y 2 O 3 ), effectively preserving the structural integrity of the carbon fibers. Compared to the SiC specimens containing uncoated carbon fibers, the density of the specimens fabricated with coated carbon fibers was increased from 2.51 to 2.85 g/cm 3 , and the strength was increased from 190 to 232 MPa.

Zitieren

APA

Chen, R., Bratten, A., Rittenhouse, J., Leu, M., & Wen, H. (2023). Additive manufacturing of high mechanical strength continuous C f /SiC composites using a 3D extrusion technique and polycarbosilane‐coated carbon fibers. Journal of the American Ceramic Society, 106(7), 4028-4037. https://doi.org/10.1111/jace.19079

Vancouver

Chen R, Bratten A, Rittenhouse J, Leu M, Wen H. Additive manufacturing of high mechanical strength continuous C f /SiC composites using a 3D extrusion technique and polycarbosilane‐coated carbon fibers. Journal of the American Ceramic Society. 2023;106(7):4028-4037. doi:10.1111/jace.19079

BibTeX
@article{Chen2023,
  author = {Chen, Ruoyu and Bratten, Adam and Rittenhouse, Joshua and Leu, Ming and Wen, Haiming},
  title = {Additive manufacturing of high mechanical strength continuous C f /SiC composites using a 3D extrusion technique and polycarbosilane‐coated carbon fibers},
  journal = {Journal of the American Ceramic Society},
  year = {2023},
  volume = {106},
  number = {7},
  pages = {4028--4037},
  doi = {10.1111/jace.19079}
}
Kostenlos starten →