EUVIMEDEUVIMED entdecken
Crossref

Influence of Surface Microcracks on Mass Change in Hf and B Modified SiCN‐Carbon Fiber Minicomposites

Arijit Roy, Bailey Walke, Gurpreet Singh

International Journal of Applied Ceramic Technology · 2026-12 · 23 (6)

DOI: 10.1111/ijac.70309 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Applied Ceramic Technology, online erschienen am 03.11.2026. Verfasst von Arijit Roy und 2 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben. Gefördert von: National Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer‐derived ceramic (PDC) coatings on carbon fibers (CFs) protect against high‐temperature oxidation; however, thermomechanical stress and cracking during precursor pyrolysis can expose fiber surfaces, creating pathways for oxygen ingress. In this study, a boron‐ and hafnium‐modified polysilazane precursor is used to prepare PDC coatings on CF single plies via a modified polymer infiltration and pyrolysis (PIP) process. Rather than studying high‐temperature stability limits of SiHfBCN‐coated CF composites, we track macroscale mass changes and localized crack evolution. Up to three PIP cycles for fabrication and an oxidation temperature of 550°C were used as a model system to investigate defects in PDC coating, oxygen ingress, and CF degradation. The relationship among coating layers, crack width, crack spacing, ceramic mass loading, and fiber mass retention is investigated using electron microscopy. After oxidation at 550°C for over an hour, SiHfBCN‐coated samples exhibited the lowest average crack width of 5.6 ± 1.5 µm and the highest crack spacing of 38.5 ± 10.9 µm compared to SiBCN and SiCN coatings. At 36% ceramic mass loading, SiHfBCN retained 25.7% of the fiber mass, compared with 12% for SiCN, 9.2% for SiBCN, and 2.9% for uncoated CFs. These findings provide mechanistic insights into coating defects, microcrack evolution, and CF degradation in PDC‐CF composites.

Förderung

  • National Science Foundation

Zitieren

APA

Roy, A., Walke, B., & Singh, G. (2026). Influence of Surface Microcracks on Mass Change in Hf and B Modified SiCN‐Carbon Fiber Minicomposites. International Journal of Applied Ceramic Technology, 23(6). https://doi.org/10.1111/ijac.70309

Vancouver

Roy A, Walke B, Singh G. Influence of Surface Microcracks on Mass Change in Hf and B Modified SiCN‐Carbon Fiber Minicomposites. International Journal of Applied Ceramic Technology. 2026;23(6). doi:10.1111/ijac.70309

BibTeX
@article{Roy2026,
  author = {Roy, Arijit and Walke, Bailey and Singh, Gurpreet},
  title = {Influence of Surface Microcracks on Mass Change in Hf and B Modified SiCN‐Carbon Fiber Minicomposites},
  journal = {International Journal of Applied Ceramic Technology},
  year = {2026},
  volume = {23},
  number = {6},
  doi = {10.1111/ijac.70309}
}
Kostenlos starten →