EUVIMEDOpdag EUVIMED
Crossref

High‐Strength Porous SiC Ceramics From Truncated Pyramid‐Shaped β ‐SiC Powder via Rapid Hot‐Pressing

Qisong Li, Ao Li, Qian Zhang, Renkai Chang, Jie Tang, Xiaozhe Cheng, Xiaoyan Guan, Yunchao Mu, Quan Huang

International Journal of Applied Ceramic Technology · 2026-04 · 23 (2)

DOI: 10.1111/ijac.70155 ↗

At a glance

Journal article in International Journal of Applied Ceramic Technology, published online on 2026-02-25. Written by Qisong Li and 8 co-authors. Cited 3 times so far (Crossref); 43 references. Funded by: National Natural Science Foundation of China.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Porous silicon carbide (SiC) ceramic is considered a promising material for many engineering applications due to its excellent chemical stability, corrosion resistance, high‐temperature stability, etc. However, preparing porous SiC ceramic without sintering aids still faces many challenges. Here, we have prepared high‐strength porous SiC ceramics without sintering aids by a one‐step rapid hot‐pressing technique using a special β‐SiC powder with truncated pyramid‐shaped structures. The formation mechanism, phase composition, and microstructure of this special powder were systematically discussed. The trends and influencing factors of the phase composition, microstructure, density, thermal conductivity, compressive strength, and flexural strength of the porous ceramics were also investigated in detail. The sample prepared at 1800°C exhibited the porosity, compressive strength, flexural strength, and thermal conductivity of 33.62%, 191.6 MPa, 71.4 MPa, and 44.96 W/(m·K), respectively. An interesting phenomenon was found that higher compressive strength and flexural strength could be achieved at a relatively lower sintering temperature due to the high‐activity and special‐structured raw material. This provided a new idea and inspiration to prepare high‐strength porous ceramics with high‐activity raw materials to obtain a weakly bonded microstructure at a lower temperature. Because this might cause a very tiny pseudo‐elastoplastic deformation before fracture.

Funding

  • National Natural Science Foundation of China

Cite

APA

Li, Q., Li, A., Zhang, Q., Chang, R., Tang, J., Cheng, X., Guan, X., Mu, Y., & Huang, Q. (2026). High‐Strength Porous SiC Ceramics From Truncated Pyramid‐Shaped β ‐SiC Powder via Rapid Hot‐Pressing. International Journal of Applied Ceramic Technology, 23(2). https://doi.org/10.1111/ijac.70155

Vancouver

Li Q, Li A, Zhang Q, Chang R, Tang J, Cheng X, et al. High‐Strength Porous SiC Ceramics From Truncated Pyramid‐Shaped β ‐SiC Powder via Rapid Hot‐Pressing. International Journal of Applied Ceramic Technology. 2026;23(2). doi:10.1111/ijac.70155

BibTeX
@article{Li2026,
  author = {Li, Qisong and Li, Ao and Zhang, Qian and Chang, Renkai and Tang, Jie and Cheng, Xiaozhe and Guan, Xiaoyan and Mu, Yunchao and Huang, Quan},
  title = {High‐Strength Porous SiC Ceramics From Truncated Pyramid‐Shaped β ‐SiC Powder via Rapid Hot‐Pressing},
  journal = {International Journal of Applied Ceramic Technology},
  year = {2026},
  volume = {23},
  number = {2},
  doi = {10.1111/ijac.70155}
}
Start for free →