Characterization of the file‐specific heat‐treated ProTaper Ultimate rotary system
International Endodontic Journal · 2023-04 · 56 (4) · 530-542
DOI: 10.1111/iej.13880 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Endodontic Journal, online erschienen am 21.12.2022. Verfasst von Jorge N R Martins und 7 weiteren Autor:innen. Beteiligte Einrichtung: Faculdade de Medicina Dentária, Universidade de Lisboa, Lisboa, Portugal. Hauptthemen laut MEDLINE: Titanium, Nickel. Die Arbeit wurde bisher 42-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e a Tecnologia.
Abstract (Originalsprache)
Aim
To compare design, metallurgy and mechanical performance of the ProTaper (PT) Ultimate system with instruments of similar dimensions from the ProGlider, PT Gold and PT Universal systems. Methodology New PT Ultimate instruments ( n = 248) were compared with instruments of similar dimensions from ProGlider ( n = 31), PT Gold ( n = 155) and PT Universal ( n = 155) systems regarding their number of spirals, helical angle, blade symmetry, tip geometry, surface finishing, nickel/titanium ratio, phase transformation temperatures and mechanical performance. One‐way anova and nonparametric Mood's median tests were used for statistical comparison ( α = 5%).
Results
All instruments had symmetrical blades without radial lands or flat sides, similar surface finishing and an almost equiatomic nickel/titanium ratio, whilst the number of spirals, helical angles and the tip geometry were different. PT Ultimate instruments showed 3 distinct heat treatments that matched with the colour of their metal wire. Slider and ProGlider instruments had similar R‐phase start (Rs) and R‐phase finish (Rf) temperatures. SX, F1, F2, F3 and Shaper instruments showed equivalent heat treatments (Rs ~45.6°C and Rf ~28.3°C) that were similar to their PT Gold counterparts (Rs ~47.9°C and Rf ~28.2°C), but completely distinct to the PT Universal ones (Rs ~16.2°C and Rf ~−18.2°C). Amongst the PT Ultimate instruments, the lowest maximum torques were observed in the SX (0.44 N cm), Slider (0.45 N cm) and Shaper (0.60 N cm) instruments, whilst the highest was noted in the FXL (4.90 N cm). PT Ultimate Slider and ProGlider had similar torsional (~0.40 N cm) and bending loads (~145.0 gf) ( p = 1.000), whilst the other PT Ultimate instruments showed statistically significantly lower maximum torque, higher angle of rotation and lower bending load (higher flexibility) than their counterparts of the PT Universal and PT Gold systems.
Conclusions
The PT Ultimate system comprises instruments with 3 distinct heat treatments that showed similar phase transformation temperatures to their heat‐treated analogues. PT Ultimate instruments presented lower torsional strength and superior flexibility than their counterparts, whilst maximum torque, angle of rotation and bending loads progressively increased with their sizes.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Faculdade de Medicina Dentária, Universidade de Lisboa, Lisboa, Portugal.
- Grupo de Investigação em Bioquimica e Biologia Oral, Unidade de Investigação em Ciências Orais e Biomédicas (UICOB), Faculdade de Medicina Dentária, Universidade de Lisboa, Lisboa, Portugal.
- Centro de Estudo de Medicina Dentária Baseada na Evidência (CEMDBE) - Cochrane Portugal, Faculdade de Medicina Dentária, Universidade de Lisboa, Lisboa, Portugal.
- School of Dentistry, Grande Rio University (UNIGRANRIO), Rio de Janeiro, Brazil.
- Fluminense Federal University, Rio de Janeiro, Brazil.
- LIBPhys-FCT UID/FIS/04559/2013, Lisboa, Portugal.
ORCID-Profile: Jorge N R Martins, Emmanuel João Nogueira Leal Silva, Marco Aurélio Versiani
Förderung
- Fundação para a Ciência e a Tecnologia
Zitieren
APA
Martins, J. N. R., Silva, E. J. N. L., Marques, D., Ajuz, N., Rito Pereira, M., Pereira da Costa, R., Braz Fernandes, F. M., & Versiani, M. A. (2023). Characterization of the file‐specific heat‐treated ProTaper Ultimate rotary system. International Endodontic Journal, 56(4), 530-542. https://doi.org/10.1111/iej.13880
Vancouver
Martins JNR, Silva EJNL, Marques D, Ajuz N, Rito Pereira M, Pereira da Costa R, et al. Characterization of the file‐specific heat‐treated ProTaper Ultimate rotary system. International Endodontic Journal. 2023;56(4):530-542. doi:10.1111/iej.13880
BibTeX
@article{Martins2023,
author = {Martins, Jorge N R and Silva, Emmanuel João Nogueira Leal and Marques, Duarte and Ajuz, Natasha and Rito Pereira, Mário and Pereira da Costa, Rui and Braz Fernandes, Francisco Manuel and Versiani, Marco Aurélio},
title = {Characterization of the file‐specific heat‐treated ProTaper Ultimate rotary system},
journal = {International Endodontic Journal},
year = {2023},
volume = {56},
number = {4},
pages = {530--542},
doi = {10.1111/iej.13880}
}
EUVIMED