EUVIMEDOpdag EUVIMED
Crossref

Fatigue Performance Improvement of AA6063‐T6 Adjacent Fastener Holes via Electromagnetic Cold Expansion

Yuhan Yang, Tianci Chen, Huihui Geng, Zicheng Wang, Changxing Li, Xiaofei Xu, Shaowei Ouyang

Fatigue & Fracture of Engineering Materials & Structures · 2026-12 · 49 (12) · 5370-5383

DOI: 10.1111/ffe.70448 ↗

At a glance

Journal article in Fatigue & Fracture of Engineering Materials & Structures, published online on 2026-09-07. Written by Yuhan Yang and 6 co-authors. 41 references. Funded by: National Natural Science Foundation of China.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The noncontact electromagnetic cold expansion (EMCE) process using Lorentz force is promising for enhancing fastener hole fatigue performance, yet its application to adjacent holes remains limited. This study systematically investigates the fatigue behavior of AA6063‐T6 components with two adjacent holes treated by EMCE via dual‐frequency discharge. Numerical simulations and experiments demonstrate uniform hole expansion from 6.00 to 6.10 mm, accompanied by a peak residual compressive stress of −235 MPa around each hole. Fatigue tests reveal that the EMCE‐treated samples achieve fatigue lives 6.08 and 2.33 times longer than untreated samples under stress loads of 120 and 130 MPa, respectively. Microstructural analysis shows significant plastic strain between adjacent holes but no pronounced grain refinement. These findings confirm EMCE as an effective, practical technique for strengthening adjacent fastener holes in aerospace structures, providing critical technical support for its engineering application.

Funding

  • National Natural Science Foundation of China

Cite

APA

Yang, Y., Chen, T., Geng, H., Wang, Z., Li, C., Xu, X., & Ouyang, S. (2026). Fatigue Performance Improvement of AA6063‐T6 Adjacent Fastener Holes via Electromagnetic Cold Expansion. Fatigue & Fracture of Engineering Materials & Structures, 49(12), 5370-5383. https://doi.org/10.1111/ffe.70448

Vancouver

Yang Y, Chen T, Geng H, Wang Z, Li C, Xu X, et al. Fatigue Performance Improvement of AA6063‐T6 Adjacent Fastener Holes via Electromagnetic Cold Expansion. Fatigue & Fracture of Engineering Materials & Structures. 2026;49(12):5370-5383. doi:10.1111/ffe.70448

BibTeX
@article{Yang2026,
  author = {Yang, Yuhan and Chen, Tianci and Geng, Huihui and Wang, Zicheng and Li, Changxing and Xu, Xiaofei and Ouyang, Shaowei},
  title = {Fatigue Performance Improvement of AA6063‐T6 Adjacent Fastener Holes via Electromagnetic Cold Expansion},
  journal = {Fatigue & Fracture of Engineering Materials & Structures},
  year = {2026},
  volume = {49},
  number = {12},
  pages = {5370--5383},
  doi = {10.1111/ffe.70448}
}
Start for free →