EUVIMEDAtrasti EUVIMED
Crossref

Investigation on the Fracture Mechanism of Ductile Material Plate With an Inclined Surface Crack Under Uniaxial Compression

Qi Pei, Tian‐Hao Ma, Li‐Zhu Jin, Chang‐Yu Zhou

Fatigue & Fracture of Engineering Materials & Structures · 2026-09 · 49 (9) · 3919-3937

DOI: 10.1111/ffe.70364 ↗

At a glance

Journal article in Fatigue & Fracture of Engineering Materials & Structures, published online on 2026-07-08. Written by Qi Pei and 3 co-authors. 38 references. Funded by: National Natural Science Foundation of China.

SantraukaBibliografiniai duomenysCiteRelated studies

Abstract (original language)

A clear understanding of ductile fracture under compressive loading is essential. This study investigates the fracture behavior of 10# steel plates with inclined surface cracks subjected to uniaxial compression. The effects of crack geometry (length, depth, and inclination angle) and specimen thickness on load‐bearing capacity and crack initiation behavior are systematically analyzed. Fracture propagation is simulated using the GTN damage model and experimentally characterized by digital image correlation (DIC), scanning electron microscopy (SEM), and three‐dimensional laser scanning. Results indicate that compressive loading in ductile materials primarily causes crack tip blunting and free‐surface torsional deformation rather than direct crack initiation. The out‐of‐plane crack initiation angle deviates from the GMTSED criterion for brittle fracture, and the fracture mode gradually transitions from ductile fracture to shear‐dominated failure during crack propagation. These findings provide valuable insights into the fracture mechanisms of ductile metallic materials under compressive loading.

Funding

  • National Natural Science Foundation of China

Cite

APA

Pei, Q., Ma, T., Jin, L., & Zhou, C. (2026). Investigation on the Fracture Mechanism of Ductile Material Plate With an Inclined Surface Crack Under Uniaxial Compression. Fatigue & Fracture of Engineering Materials & Structures, 49(9), 3919-3937. https://doi.org/10.1111/ffe.70364

Vancouver

Pei Q, Ma T, Jin L, Zhou C. Investigation on the Fracture Mechanism of Ductile Material Plate With an Inclined Surface Crack Under Uniaxial Compression. Fatigue & Fracture of Engineering Materials & Structures. 2026;49(9):3919-3937. doi:10.1111/ffe.70364

BibTeX
@article{Pei2026,
  author = {Pei, Qi and Ma, Tian‐Hao and Jin, Li‐Zhu and Zhou, Chang‐Yu},
  title = {Investigation on the Fracture Mechanism of Ductile Material Plate With an Inclined Surface Crack Under Uniaxial Compression},
  journal = {Fatigue & Fracture of Engineering Materials & Structures},
  year = {2026},
  volume = {49},
  number = {9},
  pages = {3919--3937},
  doi = {10.1111/ffe.70364}
}
Start for free →