Investigating Crack Resistance Behavior of Polypropylene Using J integral, J‐R Curve and Fractographic Analysis
Fatigue & Fracture of Engineering Materials & Structures · 2026-08 · 49 (8) · 3404-3419
DOI: 10.1111/ffe.70325 ↗Kurz gefasst
Fachartikel in der Zeitschrift Fatigue & Fracture of Engineering Materials & Structures, online erschienen am 21.05.2026. Verfasst von N. Choupani und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
In this study, the fracture response of polypropylene (PP) was assessed using J ‐integral evaluation, J‐R curve construction, and fractography examination. J‐R and load–displacement curves were analyzed to determine critical loads and estimate J ‐integral values based on standards established for polymer fracture testing, which led to the evaluation of the J IC fracture toughness parameter. Numerical validation was performed to obtain dimensionless stress intensity coefficients and geometry‐dependent parameters, which resulted in J‐R curves and J IC values that were consistent with experimental observations. Experimental analysis indicated that the onset of plastic deformation at the crack tip leads to a significant increase in the J integral values compared with perfectly elastic behavior. Scanning electron microscopy revealed that as the crack propagated from the initiation point to the final fracture zone, both the magnitude and intensity of the surface peaks increased, indicating a rise in the material's resistance to crack propagation.
Zitieren
APA
Choupani, N., Shameli, M., Haddadi, E., & Aydiner, P. (2026). Investigating Crack Resistance Behavior of Polypropylene Using J integral, J‐R Curve and Fractographic Analysis. Fatigue & Fracture of Engineering Materials & Structures, 49(8), 3404-3419. https://doi.org/10.1111/ffe.70325
Vancouver
Choupani N, Shameli M, Haddadi E, Aydiner P. Investigating Crack Resistance Behavior of Polypropylene Using J integral, J‐R Curve and Fractographic Analysis. Fatigue & Fracture of Engineering Materials & Structures. 2026;49(8):3404-3419. doi:10.1111/ffe.70325
BibTeX
@article{Choupani2026,
author = {Choupani, N. and Shameli, M. and Haddadi, E. and Aydiner, P.},
title = {Investigating Crack Resistance Behavior of Polypropylene Using J integral, J‐R Curve and Fractographic Analysis},
journal = {Fatigue & Fracture of Engineering Materials & Structures},
year = {2026},
volume = {49},
number = {8},
pages = {3404--3419},
doi = {10.1111/ffe.70325}
}
EUVIMED