EUVIMEDEUVIMED entdecken
Crossref

Deformation and Damage Mechanisms of 316L Stainless Steel Under Various Dwell Times and Modes of Creep‐Thermomechanical Fatigue Interaction

Peng Yin, Wei Zhang, Qiaofa Yang, Xinghui Chen, Fei Liang, Cheng Ye, Changyu Zhou

Fatigue & Fracture of Engineering Materials & Structures · 2026-08 · 49 (8) · 3326-3348

DOI: 10.1111/ffe.70317 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fatigue & Fracture of Engineering Materials & Structures, online erschienen am 13.05.2026. Verfasst von Peng Yin und 6 weiteren Autor:innen. Die Arbeit nennt 68 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The creep‐thermomechanical fatigue (CTMF) behavior and microscopic damage mechanisms of 316L austenitic stainless steel are investigated under in‐phase loading conditions with different dwell times and dwell modes. The results show that increasing dwell time intensifies stress relaxation, reduces the stabilized peak tensile and compressive stresses, and broadens the hysteresis loops, leading to an increase in the inelastic strain range. Microstructural characterization indicates that the observed cyclic softening is mainly associated with thermally activated dynamic recovery, during which dense dislocation tangles progressively rearrange into lower‐energy subgrain structures. The reduction in fatigue life is governed by the coupled effects of dwell‐enhanced inelastic deformation, creep cavitation, and oxidation‐related damage, with their relative contributions depending on dwell mode. Under tensile dwell, fatigue life decreases rapidly at short dwell times and then becomes less sensitive to further dwell extension, which is attributed to the competition between enhanced inelastic deformation/cavity formation and the crack‐tip blunting effect of a thickened oxide layer. Under compressive dwell, brittle rupture of the oxide layer exposes fresh metal and thereby facilitates crack propagation, although the dwell‐time sensitivity of fatigue life also weakens at longer hold times. In contrast, symmetric dwell causes the most severe degradation because the largest inelastic deformation is coupled with oxidation during tensile holding and oxide rupture during compressive holding.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Yin, P., Zhang, W., Yang, Q., Chen, X., Liang, F., Ye, C., & Zhou, C. (2026). Deformation and Damage Mechanisms of 316L Stainless Steel Under Various Dwell Times and Modes of Creep‐Thermomechanical Fatigue Interaction. Fatigue & Fracture of Engineering Materials & Structures, 49(8), 3326-3348. https://doi.org/10.1111/ffe.70317

Vancouver

Yin P, Zhang W, Yang Q, Chen X, Liang F, Ye C, et al. Deformation and Damage Mechanisms of 316L Stainless Steel Under Various Dwell Times and Modes of Creep‐Thermomechanical Fatigue Interaction. Fatigue & Fracture of Engineering Materials & Structures. 2026;49(8):3326-3348. doi:10.1111/ffe.70317

BibTeX
@article{Yin2026,
  author = {Yin, Peng and Zhang, Wei and Yang, Qiaofa and Chen, Xinghui and Liang, Fei and Ye, Cheng and Zhou, Changyu},
  title = {Deformation and Damage Mechanisms of 316L Stainless Steel Under Various Dwell Times and Modes of Creep‐Thermomechanical Fatigue Interaction},
  journal = {Fatigue & Fracture of Engineering Materials & Structures},
  year = {2026},
  volume = {49},
  number = {8},
  pages = {3326--3348},
  doi = {10.1111/ffe.70317}
}
Kostenlos starten →