EUVIMEDAtrasti EUVIMED
Crossref

Nanoindentation Investigation on the Relation Between Local Mechanical Properties and Cyclic Hardening/Softening Behavior of 310S Stainless Steel

Yuxuan Song, Xinjie Suo, Yuanlong Lin, Zhihui Cai, Hai Zhang, Linye Zhang, Yuebing Li, Weiya Jin, Zengliang Gao

Fatigue & Fracture of Engineering Materials & Structures · 2026-07 · 49 (7) · 2866-2878

DOI: 10.1111/ffe.70295 ↗

At a glance

Journal article in Fatigue & Fracture of Engineering Materials & Structures, published online on 2026-04-27. Written by Yuxuan Song and 8 co-authors. 52 references. Funded by: Natural Science Foundation of Zhejiang Province, National Natural Science Foundation of China.

SantraukaBibliografiniai duomenysCiteRelated studies

Abstract (original language)

The fatigue behaviors of 310S stainless steel contained initial hardening, cyclic softening, and secondary hardening, which are complex and hard to characterize. In this work, the fully reversed strain‐controlled fatigue tests were conducted at constant strain amplitudes ranging from 0.25% to 1.0%. Scanning electron microscopy (SEM) and electron back scattered diffraction (EBSD) were used to observe microstructures. The mechanisms of initial hardening, cyclic softening and secondary hardening behaviors were dominated by the interaction between dislocation and grain boundary, recovery of grain boundary, and formation of substructure such as dislocation cell within the grain, respectively. Nanoindentation measurements of hardness and elastic modulus showed that the hardness of specimens increased at low strain amplitudes due to higher geometrically necessary dislocations (GND) density near grain boundaries. When the strain amplitude further increases (above 0.5%), the recovery of grain boundary reaches a limitation, and the hardness of the tested specimen is saturated at 2.45 GPa.

Funding

  • Natural Science Foundation of Zhejiang Province
  • National Natural Science Foundation of China

Cite

APA

Song, Y., Suo, X., Lin, Y., Cai, Z., Zhang, H., Zhang, L., Li, Y., Jin, W., & Gao, Z. (2026). Nanoindentation Investigation on the Relation Between Local Mechanical Properties and Cyclic Hardening/Softening Behavior of 310S Stainless Steel. Fatigue & Fracture of Engineering Materials & Structures, 49(7), 2866-2878. https://doi.org/10.1111/ffe.70295

Vancouver

Song Y, Suo X, Lin Y, Cai Z, Zhang H, Zhang L, et al. Nanoindentation Investigation on the Relation Between Local Mechanical Properties and Cyclic Hardening/Softening Behavior of 310S Stainless Steel. Fatigue & Fracture of Engineering Materials & Structures. 2026;49(7):2866-2878. doi:10.1111/ffe.70295

BibTeX
@article{Song2026,
  author = {Song, Yuxuan and Suo, Xinjie and Lin, Yuanlong and Cai, Zhihui and Zhang, Hai and Zhang, Linye and Li, Yuebing and Jin, Weiya and Gao, Zengliang},
  title = {Nanoindentation Investigation on the Relation Between Local Mechanical Properties and Cyclic Hardening/Softening Behavior of 310S Stainless Steel},
  journal = {Fatigue & Fracture of Engineering Materials & Structures},
  year = {2026},
  volume = {49},
  number = {7},
  pages = {2866--2878},
  doi = {10.1111/ffe.70295}
}
Start for free →